EBPcivicsi
GOT PREP?
Detailed this Volvo on Saturday, my task was to bring it back to life.
The paint had severe buffer swirls in it from another shop (won’t name names) that needed to be removed. The interior also needed a bit of freshening up. J
For the paint the process was:
Wash
Clay with Meguiars aggressive clay bar
Apply optimum compound with a polishing pad via rotary polisher with a polishing @1400 RPM’s
Apply Meguiars #80 speed glaze with the porter cable 7424 with a polishing pad on speed 5
Apply two thin coats of Meguiars #21 polymer sealant
Tires were dressed with Meguiars high endurance (original formula)
Glass cleaned with NXT glass cleaner
For the interior the process was:
Thoroughly vacuum
Clean carpets with Costco APC 10:1, extract with hot water using LGCM.
I then used the APC and a small brush to detail every crack and crevice. I alos used a steamer (the Costco one) to blast out the grime on the door panels.
I dressed the leather with Lexol
The engine was:
Degreased with a citrus-based degreaser
Agitated with old mitts and an assortment of brushes
Pressure washed
Blown dry, then dress with eagle one pro water based dressing cut 1:1.
Before on the paint, is this a buffer swirl? LOL
Full car
The paint had severe buffer swirls in it from another shop (won’t name names) that needed to be removed. The interior also needed a bit of freshening up. J
For the paint the process was:
Wash
Clay with Meguiars aggressive clay bar
Apply optimum compound with a polishing pad via rotary polisher with a polishing @1400 RPM’s
Apply Meguiars #80 speed glaze with the porter cable 7424 with a polishing pad on speed 5
Apply two thin coats of Meguiars #21 polymer sealant
Tires were dressed with Meguiars high endurance (original formula)
Glass cleaned with NXT glass cleaner
For the interior the process was:
Thoroughly vacuum
Clean carpets with Costco APC 10:1, extract with hot water using LGCM.
I then used the APC and a small brush to detail every crack and crevice. I alos used a steamer (the Costco one) to blast out the grime on the door panels.
I dressed the leather with Lexol
The engine was:
Degreased with a citrus-based degreaser
Agitated with old mitts and an assortment of brushes
Pressure washed
Blown dry, then dress with eagle one pro water based dressing cut 1:1.
Before on the paint, is this a buffer swirl? LOL





Full car
