Tips for a FK1000P newbie?

Maison said:
So, would you guys do:



1. 2180 -> 1000P -> PW and 425 as QD or every other wash or

2. 1000P -> PW and 425 as QD or every other wash or

3. 2180 -> PW



I'm lost, seems like endless choices.
Click to expand...



2. looks good...
 
Maison said:
So, would you guys do:



1. 2180 -> 1000P -> PW and 425 as QD or every other wash or

2. 1000P -> PW and 425 as QD or every other wash or

3. 2180 -> PW



I'm lost, seems like endless choices.
Click to expand...



Choices are good!



It's up to you how much effort you want to put into it.



The truth is, you would also be perfectly fine just going with 1000p by itself.



If you want to add a bit to the looks, top with PW.



If you want a little extra protection, go 2180 topped with 1000p.



425 is a must! :bigups
 
I'm leaning towards FK1000P on my newly-acquired white car (after the project if finished and the paint has cured), and I'm *NOT* planning to top the FK1000P with a wax. On white and silver I think the sealant will look fine all by itself. Some people like the wax topper look, others don't. I'd see what you think after getting a few layers of the FK1000P on there.



And FWIW, I use FK425 after *every* wash, after blowing off most of the water but before the final drying.
 
Accumulator said:
I'm leaning towards FK1000P on my newly-acquired white car (after the project if finished and the paint has cured), and I'm *NOT* planning to top the FK1000P with a wax. On white and silver I think the sealant will look fine all by itself. Some people like the wax topper look, others don't. I'd see what you think after getting a few layers of the FK1000P on there.



And FWIW, I use FK425 after *every* wash, after blowing off most of the water but before the final drying.
Click to expand...



Excellent point about lighter colors like white and silver probably not needing a wax topper.
 
Must jump in - 1000P is the only product being used on my light silver vehicle. IMHO, it looks OUTSTANDING on light silver. Durability has proven excellent.



Haven't used it on any other color, as I like other products on them. But may test it out instead of 476 on one of my other vehicles this winter.
 
Accumulator said:
I'm leaning towards FK1000P on my newly-acquired white car (after the project if finished and the paint has cured), and I'm *NOT* planning to top the FK1000P with a wax. On white and silver I think the sealant will look fine all by itself. Some people like the wax topper look, others don't. I'd see what you think after getting a few layers of the FK1000P on there.



And FWIW, I use FK425 after *every* wash, after blowing off most of the water but before the final drying.
Click to expand...



1000P should look great on white and give well above avg durability
 
You must log in or register to reply here.
Back
Top