Sonus SwirlBusterâ„¢

OK David, sounds like I'm on the right track. I will up the RPMs and put a little bit more pressure on the pad. It sounds like it's not uncommon to have to follow with a less aggressive pad and polish which is fine.
 
DavidB said:
Hey guys, I'm in the warehouse today, so I won't have opportunity to fully comment until a bit later.



The pad was specifically designed for DA, but I did extensive testing with my rotary on two different vehicles. I experienced so hologram issues when used with SFX-1, but the holograms polished out very nicely with SFX-2 and the SwirlBuster polish.



I used a lot of pressure with my rotary and more speed than recommended to test for "abusive use". I discovered that under to much pressure the pad runs dry, which caused more hologram marks. I resolved this issue by wetting the pad with detail spray before loading with polish.



I also discovered that the pad really likes speed. When I ran the pad at 1800 to 2000 RPM, I got very nice gloss with SFX-2, however, it was still necessary to do a final pass with a white SFX pad and SFX-2 or SFX-3 polish. With the SwirlBuster polish, this was not necessary. The extra lubrication and acrylic sealant in the polish gives a very nice final finish.
Click to expand...

Alright Dave... Now... when is the polish going to be available?

And... forgive me please, but what is "DA"?
 
I have used this pad extensively since I got one a week or so ago. As DavidB mentioned, keeping the pad moist and well filled with product makes it work pretty sweetly. I like it a lot!
 
Hey guys, since I don't use a PC for real defect correction, I'm probably not going to use this pad too much, at least not without having to follow with a white pad to remove the hologramming I get with it via rotary. The traces of those pockets in the pad are the holgramming, so I'm thinking if this pad were available in a "pocketless" version, ( the other available orange pads on the market are, I assume) that would end the holgramming issue. Otherwise, this pad does a nice job of actual defect correction and that's with using Optimum polish so far too.
 
Doesnt look like this polish is going to come out anytime soon, already 2 months behind - - - Hopefully all the hype brought up in this thread is worth the wait :tumblewee
 
thanks for the heads Up!!!! :bigups



Has anyone members did beta testing for this....



To bad there pre order incase there limited qty....



is this pc and rotary freindly or just pc?
 
Hi guys,



Yes, I have been hard at work building a site for the Sonus line. It's a necessary move as the product line is going into distribution.



SwirlBuster Polish (SON-450) is in stock in the warehouse. We are waiting for labels to come back from the printer. I'm re-doing all of the Sonus labels to include a UPC bar code, so it turned out to be a BIG project.



db
 
Hi Mike,



Yes! I will be doing a combo with the SB Pad and Klasse AIO, as well. I have done several black/red cars with the pad/aio combo with amazing results. There is just something about that pad and the acrylic that works really well.



db
 
After ONLY a three month delay... the SwirlBuster polish is in stock and orders will ship Wednesday June 14th,



SwirlBuster Polish



There is an $8 discount if you purchase both the SwirlBuster pad and polish together. For those of you who have already purchased the pad (thank you!), please use the "Sonus" discount coupon.



db
 
You must log in or register to reply here.
Back
Top