Williebeemin
New member
Do you guys like the CCS Lake Country pads with the grooves or do you like the standard flat pad? Which one do you guys think works better?
Thanks, Will
Thanks, Will
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Pads
- Thread starter Williebeemin
- Start date
imported_Dave KG
New member
On the rotary, I prefer the flat pads myself as I find the flow just a little better than the CCS pads with the little holes in them. BUt that just a personal preference for me, I'm sure others will prefer the CCS design.
I have noticed occasionally with some products on the PC that it can get sucked up into the holed and clump there, caking and then spitting out in chunks - as if you've overloaded the pad, but this is with minimal amounts of product applied.
I have noticed occasionally with some products on the PC that it can get sucked up into the holed and clump there, caking and then spitting out in chunks - as if you've overloaded the pad, but this is with minimal amounts of product applied.
I like the flat pads better on the PC personally. I experienced what dave is talking about with several different products, and definitely not using too much. From what I've read, they seem to get a little better review with rotary users.. I ordered a few of the 7.5" CCS pads last week for that, but haven't got to use them yet because the Makita hasn't arrived. I'm hoping I like them a little bit better.
Bigpoppa3346
New member
I really don't understand the whole concept of the holes in the CCS pads, they really do nothing for me. With that said, 5" LC CCS pads from Danase and either a PC or UDM is all I use. HIGHLY reccommended.
Bigpoppa3346 said:I really don't understand the whole concept of the holes in the CCS pads, they really do nothing for me. With that said, 5" LC CCS pads from Danase and either a PC or UDM is all I use. HIGHLY reccommended.
They're supposed to help keep polish out of the pad and keep it on the surface you're working on. The cells in the holes are closed so that it cant soak polish up.