Need a cheap rotary?

If it is the orange rotary from HF. I have one and it does get Hot. It may be fine for spot polishing, but for use on a whole vehicle you may need gloves.
 
velobard said:
Was this review ever done? I can't track it down.
Click to expand...

Nope, I haven't had time. I will tell you that is worth every penny. I'll put it together for posting this weekend.
 
blazini said:
Harbor Freight stuff isn't absolute top of the line, but the only reason it's cheap is because they have their own brands and don't spend money on advertising and outside distribution, not because the tools are cheaply made.
Click to expand...



Those buffers are cheap for a reason and it isn't advertising and outside distribution. It's quality, pure and simple. Work with the HF and a good brand for awhile then come back and say there isn't a quality difference.
 
justin30513 said:
Nope, I haven't had time. I will tell you that is worth every penny. I'll put it together for posting this weekend.
Click to expand...

I just went to the Black and Decker website and I can't find this thing listed anywhere. Where did you buy your's and how much did it cost?



Also, I noticed on the ebay ad it says this has 4 amps. The Vector Waxxpro is listed at 11 amps.
 
MichaelM said:
Those buffers are cheap for a reason and it isn't advertising and outside distribution. It's quality, pure and simple. Work with the HF and a good brand for awhile then come back and say there isn't a quality difference.
Click to expand...
Well the post is about a used Black & Decker from Ebay. 4 amps and 2 speeds? B&D tools are absolute garbage and a used one is even worse. I had a B&D angle grinder and jigsaw both break within 2 weeks. A "good brand" isn't really the topic of this post, "cheap" is.
 
Saving $100 or so on a relatively cheap polisher might be fine, but if your a serious Detailer don't go cheap. Maybe Vector quality and up, but again I strongly recommend with a reputable brand. The quality difference with some of these designs is HUGE.
 
I have close to 20 years with buffers and a very cheap brand is not the one to learn on. If I had one I would have a very hard time using it even with my skill. They are not balanced, not built, way too light and toy like and gets way too hot.



If you guys want a decent buffer, I would suggest going to a pawn shop or a used tool store. You can pick up a great quality one for around $100. Also look for an adjustable speed control. Good brands are Makita, hitachi, older black and deckers, dewalt, milwaukee, snap on. Just make sure it does not look beat up and make sure it does not sound rough and the gears are smooth when turning the pad with your hand. If it sounds clunky when turning by hand, put it back.



In some cases a name brand can still be rebuilt very easy with a brush kit from Grainger Tool. I have used many many buffers in my time and quality is a big thing when it comes to paint. The cheap buffer just won't cut it..sorry! I just thought I would tell you all so you don't waste your money. If it were me, I would buy a quality used one. Best and smart investment!



Hope this helps!

Ryan
 
You must log in or register to reply here.
Back
Top