Heavy swirl removal on a red Mustang GT *56K* ROFL

EBPcivicsi

EBPcivicsi

GOT PREP?
Saturday I had a fairly trashed 98 Z28 to detail, interior and exterior. Today, I had a detail that I could focus soley on the paint�exterior only!!! I love these details as I find interiors to be “necessary evils.�



The paint had moderate to severe swirls and marring and needed to be polished. The swirls were so numerous that it made the red paint look orange and dull.



I spent just under 7 hours correcting the paint. With the exception of a few tracers, the paint is perfect. I loved detailing this car and fell in love with the color, it is just gorgeous. This is my second time detailing for this customer and it has been great each time. While the cars have had swirls and marring, they are always very clean.



The process for the car was:



Wash



Clay with Meguiars aggressive clay bar



Dry



Tape moldings, remove antenna, etc



Compound with Meguiars #85 diamond cut via the rotary and a twisted wool pad @2000 RPM’s



Polish with Optimum polish via the rotary and Meguiars polishing pad @1400 RPM’s



Apply Meguiars #80 speed glaze via the PC with meguiars polishing pad @ speed 5



Apply two thin coats of Meguiars #21 by hand



All products removed by microfiber



AIO on trim



NXT glass cleaner on glass



Meguiars all-season dressing on tires



Before:

tn_IMG_1385.jpg






tn_IMG_1397.jpg






tn_IMG_1406.jpg




tn_IMG_1407.jpg






tn_IMG_1408.jpg






tn_IMG_1409.jpg
 
After:



NOTE: The #85/Op combo is an awesome 1-2 punch for heavy to moderate swirls, but be sure to remove the #85 section by section�I forgot to do this and some of it “welded� itself to the finish.





tn_IMG_1417.jpg




tn_IMG_1421.jpg






tn_IMG_1428.jpg






tn_IMG_1431.jpg






tn_IMG_1476.jpg




tn_IMG_1491.jpg
 
I have some marring Im planning on working on this week and plan on going with either OP...Love the stuff. Still deciding whether to use a polishing or finishing pad. Newho...The tires and wheels look great!! What did you use on the wheels, even the inner rim looks flawless! Great job!!
 
Excellent job as usual! I have a question though, you said it took 7 hours for the detail. I like using 21 as a sealant as well, but was told to wait 12 hours between coats. Have you found this unnecessary?
 
DocHoliday said:
What did you use on the tires?
Click to expand...



ebpcivicsi said:
Meguiars all-season dressing on tires
Click to expand...







Thanks for the compliments guys. :)





For the wheels, I just used a citrus based degreaser 4:1, scrubbed with an EZdetail brush, wiped with a MF mitt, then rinsed. They were already fairly clean to begin with.





tdekany, I buy most of them locally through a dealer supply warehouse. Today I used the twisted wool pad that comes with the Makitta. :D
 
Sarcazmo said:
Excellent job as usual! I have a question though, you said it took 7 hours for the detail. I like using 21 as a sealant as well, but was told to wait 12 hours between coats. Have you found this unnecessary?
Click to expand...





I apply two coats to ensure adequete coverage, I am not a "layerer." :)



IMO, two thin coats of#21 applied to properly prepped paint look as good and provide as good of protection as any thing on the market. No need for multiple "layers."
 
Awesome turnaround! I can't believe how nasty those hood swirls were and how excellent the hood looks in the after shots. :)
 
You must log in or register to reply here.
Back
Top