imported_Totoland Mach
New member
Boy: this was a monster to do! The entire finish was badly swirled and scratched. And, of course, it is Black.
Here's what I faced at the start:
Soooooooo....it was a double compound. First with wool and 3M Extra Cut, then foam and 3M Perfect-It 3000 compound.
Some work-in-progress shots of the door
Peppered bumper
Most of the small peppering is gone
Here's a good comparison of Before and After
A direct flash from the camera will also show you how the finish is doing!
Some overall shots
After the double compounding, I used Menzerna 106 with a Meguiar's yellow polish pad to remove some trace scratches. Then back to 3M Dark Glaze followed by 3M Ultrafina SE.
Monday....it's wax time which will be #26.
This was a hard clear coat that finished nicely.
Toto
Here's what I faced at the start:
Soooooooo....it was a double compound. First with wool and 3M Extra Cut, then foam and 3M Perfect-It 3000 compound.
Some work-in-progress shots of the door
Peppered bumper
Most of the small peppering is gone
Here's a good comparison of Before and After
A direct flash from the camera will also show you how the finish is doing!
Some overall shots
After the double compounding, I used Menzerna 106 with a Meguiar's yellow polish pad to remove some trace scratches. Then back to 3M Dark Glaze followed by 3M Ultrafina SE.
Monday....it's wax time which will be #26.
This was a hard clear coat that finished nicely.
Toto
