AXE plus Z2 Pro = good ? (.5 MB easy for 56k :))

imported_Axe

New member
OK,

well it was such a nice day today, that I thought I would treat AXE to a little known product that is Z2pro, I am sure one or two of you may have heard of this product right ? ;)



So here are the pics of AXE treated with Z2Pro



IMG_1615_th.jpg




IMG_1626_th.jpg




IMG_1637_th.jpg




IMG_1640_th.jpg




IMG_1644_th.jpg




IMG_1659_th.jpg




IMG_1661_th.jpg




IMG_1662_th.jpg




:) please excuse the wipers (got those water marks afterwards)
 
Love that 3rd reflection shot, I think that's the first time I've ever seen that one before. Gotta love Z2novice ;) . Did you do any prep beforehand worth mentioning? The car looks GRT...
 
You have to much Autopia in you to make mention of the wiper blades.



As was mentioned by another member...that car is sure wet lookin!!



Wonderful look! You sure know how to take advantage of the light.
 
" I'm Blind !" Awesome job. What prep did you do? In #7, I see you are outside a beauty salon, at least thats what the reflection says.... LOL !:bow :bow :bow :xyxthumbs
 
:) thanks for the kind words everyone, it means a lot ... it was just such a nice day, that I had to get some shots so I thought I would post them. Actually this post is a little misleading because the finish you are looking at is not purely Z2. I bet several of you suspected this already, so my process and I am never one afraid of courting contraversy went like this.



The usual wash methods for we autopians, (not the recommended Dawn wash) - Although I want Z to last awhile I am really not concerned if I have to re-polish sooner (Read my reply to davidB's new thread as an example!)



Then I IP'd AXE then AIO and then I applied the Z, however I applied it with the PC and a polishing pad (Blue Sonus) - I thought I would try this as the last time I tried applying Z I got too much on the car. The PC method is IMO a much better way of applying this product thinly. I simply sprtized the pad with Z6 (any QD would do I guess) then added four small dabs of Z then went to work. I would manage maybe a whole hood sized panel with each of the above applications.



I waited 30 minutes and wiped off with a MF easy as pie, perhaps I should have layered the Z (I was also doing the wifes car at the same time, so time wouldn't allow).



Although I was happy with the shine from the Z2pro, I still found it wanting in the depth department, on its own I always think Z is a little sterile, very similar in look to the AG products. So I decided to top, and this is where it may become a little contraversial, I decided my mettalic paintwork needed a boost so I applied NXT with PC and polishing pad, wiped off with MF, and then applied P21s by hand one panel at a time WOWO. I believe it was this stage that gave the very wet look to the car that you and I, all noticed.



I was a little tired to type all this yesterday, have a bit more time this morning before I have to work, hence the longer post. Once again, many thanks for your kind words.



Haha yes Mochamanz I was outside a beauty salon, however that was closed it was a Sunday, and if you notice the 'red' shop in the same reflection, that is where I was actually going ... a local Spar (local supermaket) heh heh. When I came out of the shop though, I noticed those mad reflections from the black blinds in the salon window on AXE's hood, couldn't resist taking the shot with the camera.
 
Great work Paul, car looks superb. :up



How did it look after NXT and before P21S? Did the P21S make a big difference? I've not tried P21S on darker paint yet, only silver.



Andrew
 
Thanks Andrew, I think the combination of NXT followed by a carnauba is well documented, and a proven success. What i was thinking was unusual here (as NXT has cleaners), was applying these over Z2pro.



So, answering your question, yes the P21s makes a big difference, but in combination with NXT. It looked warmer, and slightly more wetter after P21s.
 
Lowejackson said:
Very nice work Paul



BTW, from the 2nd picture, is your left foot really 2 feet long:)



Heh yes, and I am only 3'4" tall too :)



Andrew Timmins said:
He can use the wah pedal from anywhere on stage ;)



Hah hah, haven't had the wah peddle out in ages, might just give that a shot on my most recent recording.



blkZ28Conv said:
So we are looking at NXT topped with P21S (Zaino was cleaned/polished off by NXT). Looks great!!! After a wash or 2 can you re-take some pix???



I wondered if this might be the case, (however I have used NXT + P21s before, and the car never looked this good) and I thought with Z's remowned durability I would have thought it would withstand the minor cleaners of NXT .. but hey -- sure I will take a pic next time I wash ... any particular reason ?
 
Axe said:




I wondered if this might be the case, (however I have used NXT + P21s before, and the car never looked this good) and I thought with Z's remowned durability I would have thought it would withstand the minor cleaners of NXT .. but hey -- sure I will take a pic next time I wash ... any particular reason ?



To see if this appearance is maintained. If the cleansers in NXT can remove oxidation I believe that it will remove one layer of newly applied Z2-PRO.

How long after Z2-PRO did you top with NXT?
 
Back
Top