silvercookie
New member
My uncles car,my aunt and uncle went away for the weekend so i figured i would surprise him.
Im missing alot progress pictures mainly cause i started too late and it was getting dark and i wanted to finish before i couldnt see what i was doing.
Car has roughly 220k miles on it.
I dont think it has even been detailed.
It is waxed like once every 3 months.
Here is the line up.
Wash with dawn.
Clay-barred with Megiuars Clay kit.
wash with megiuars gold class.
Megiaurs # 9 Swirl remover on a mothers power ball on a drill, low low rpm.
then megiaurs #7 glaze by hand with a MF applicator.
then i wiped down the whole car with a MF towel.
then Eagle 1 Gel wax with a MF applicator.
Here is how the car looked after a the the first wash + claybar + second wash.
the entire car looked like this.
Testing the Megiuars ultimate compund vs the Megiuars #9.
Ultimate compound on right, un-tested paint in the middle, #9 on left. I ended up just using the swirl remover with very light pressure cause i didnt trust myself using the compound.
Here it is all done. it got too dark out. i started later then i had expected.
Roof.
Roof again
And hood.
Tell me what you think. Did i do decent job?
Im missing alot progress pictures mainly cause i started too late and it was getting dark and i wanted to finish before i couldnt see what i was doing.
Car has roughly 220k miles on it.
I dont think it has even been detailed.
It is waxed like once every 3 months.
Here is the line up.
Wash with dawn.
Clay-barred with Megiuars Clay kit.
wash with megiuars gold class.
Megiaurs # 9 Swirl remover on a mothers power ball on a drill, low low rpm.
then megiaurs #7 glaze by hand with a MF applicator.
then i wiped down the whole car with a MF towel.
then Eagle 1 Gel wax with a MF applicator.
Here is how the car looked after a the the first wash + claybar + second wash.

the entire car looked like this.





Testing the Megiuars ultimate compund vs the Megiuars #9.
Ultimate compound on right, un-tested paint in the middle, #9 on left. I ended up just using the swirl remover with very light pressure cause i didnt trust myself using the compound.

Here it is all done. it got too dark out. i started later then i had expected.

Roof.

Roof again

And hood.

Tell me what you think. Did i do decent job?