Post Your Unboxing Pictures!

On the disks it comes with. It wouldn`t`t test zero every time. Was usually off 1-3 um. Looks like it scratched the disks as well. I went out and tested my new DD just for the hell of it 17` Honda Fit. The roof measured between 90um and 110. Hood was around 100 I already did some work on the hood with Scholl S20. Door were 98-120. Found a couple spots on the fenders around 85. Not sure if I should do any polish work or should I just go really light.

Inside the door jambs I got 60-70 readings

I`m gonna do a few more test spots with it, but I may return it and go with something else. I have a couple weeks to decide.

4f6040c62987906973470b94f8e10abb.jpg



Sent from my iPhone using Tapatalk
 
thanks to some recent sales I was able to piece this kit together for the Hellcat owner at his desired kit budget and I added a few other products I had too much of.
I think he is off to the right start if he uses only these products the way I advise him

01574f7b47151a13539bde40958d69cd.jpg


bd1253a88238154ff3f92817a0ed2460.jpg
 
So 4 of my 10 drawers came in now just to wait for my 6 16qt drawers and my rolling shelving unit to come in
b3b63176e145fad2257a2c109ba36741.jpg
6d78847336529c49cd766c2840e35d74.jpg


Should be a good start for all my rags, especially my mf

Sent from my iPhone using Tapatalk
 
Civicclutch said:
So 4 of my 10 drawers came in now just to wait for my 6 16qt drawers and my rolling shelving unit to come in
b3b63176e145fad2257a2c109ba36741.jpg
6d78847336529c49cd766c2840e35d74.jpg


Should be a good start for all my rags, especially my mf

Sent from my iPhone using Tapatalk
Click to expand...

I use ones very similar to hold my pads and microfibers. I`m not too happy with mine, but I can`t find anything better. The drawers don`t pull out very smooth. The price was right and I needed something other than the plastic storage boxes I was using.
 
512detail said:
thanks to some recent sales I was able to piece this kit together for the Hellcat owner at his desired kit budget and I added a few other products I had too much of.
I think he is off to the right start if he uses only these products the way I advise him

01574f7b47151a13539bde40958d69cd.jpg


bd1253a88238154ff3f92817a0ed2460.jpg
Click to expand...




Label printer ????

:dunno:
 
CerceS550 said:
On the disks it comes with. It wouldn`t`t test zero every time. Was usually off 1-3 um. Looks like it scratched the disks as well. I went out and tested my new DD just for the hell of it 17` Honda Fit. The roof measured between 90um and 110. Hood was around 100 I already did some work on the hood with Scholl S20. Door were 98-120. Found a couple spots on the fenders around 85. Not sure if I should do any polish work or should I just go really light.

Inside the door jambs I got 60-70 readings

I`m gonna do a few more test spots with it, but I may return it and go with something else. I have a couple weeks to decide.

4f6040c62987906973470b94f8e10abb.jpg



Sent from my iPhone using Tapatalk
Click to expand...
I have the same one. I ordered it from amazon last year. I just cant seem to get it calibrated correctly and it gives me really odd readings on paint.

Sent from my SM-G930T using Tapatalk
 
RaydiantDetail said:
I have the same one. I ordered it from amazon last year. I just cant seem to get it calibrated correctly and it gives me really odd readings on paint.

Sent from my SM-G930T using Tapatalk
Click to expand...

I`m sending it back soon. I have till the 31st to return it on amazon.


Sent from my iPhone using Tapatalk
 
Civicclutch said:
So 4 of my 10 drawers came in now just to wait for my 6 16qt drawers and my rolling shelving unit to come in
b3b63176e145fad2257a2c109ba36741.jpg
6d78847336529c49cd766c2840e35d74.jpg


Should be a good start for all my rags, especially my mf

Sent from my iPhone using Tapatalk
Click to expand...
Where did you get these from? I have a few of these stacking system boxes and would like to get some more
 
PFM 16x16 towels arrived, already washed , and are now air drying!

zwTxEdRl.jpg


Can`t wait to clean this mess up

ph0EeOul.jpg


Stooopid rain.
 
Angus said:
PFM 16x16 towels arrived, already washed , and are now air drying!

zwTxEdRl.jpg


Can`t wait to clean this mess up

ph0EeOul.jpg


Stooopid rain.
Click to expand...

You will be pleasantly surprised with that towel. Picked one up at my local pep boys to try out. Worked good when I used it with ech2o.
 
RaydiantDetail said:
I have the same one. I ordered it from amazon last year. I just cant seem to get it calibrated correctly and it gives me really odd readings on paint.
Click to expand...

Looks similar to mine, not sure on model number. Are you guys zeroing it out before measuring? I do it before each test session, and always allow sufficient time (and distance from the panel) for it to refresh after each reading. Usually easy as I`m writing down the numbers :)
 
JustJesus said:
Looks similar to mine, not sure on model number. Are you guys zeroing it out before measuring? I do it before each test session, and always allow sufficient time (and distance from the panel) for it to refresh after each reading. Usually easy as I`m writing down the numbers :)
Click to expand...
Yes always zero it out. But I find i always have to calibrate it. Even when i get the correct reading on the calibration disk ill get readings like -0.5 mils or some weird number on the paint.

Sent from my SM-G930T using Tapatalk
 
You must log in or register to reply here.
Back
Top