Zaino question (and a few misc others)

S

simracer

New member
Hello all,



Well, I've been reading through the archives quite a bit and must say that I've learned a great deal. However, I did have a few questions for you experts that I can't say I remember seeing answered as I've browsed back on the forum.



I've been a Zaino users for several years now. But one thing I've never really known is how often or under what circumstances one should go back and start over with Z1. And yes, I do still use Z1. Still haven't hopped on the ZFX bandwagon.



Assuming that the Zaino protection gained from Z1 and Z2 lasts 6 months or so, should one then go back and start over again with Z1? And if so, does that mean you should strip the protection again either by washing with Dawn, claying or a chemical cleaner so that Z1 can bond directly to the paint surface?



I welcome your recommendations or suggestions.



As for my other questions, I do recall seeing how many folks seem to have quite a time removing Klasse SG. Out of curiousity, is Klasse AIO as difficult to remove or is this just an issue with SG?



Further, I see a great many folks are satisfied with the cleaning power of AIO. However, since I'm using Zaino, should I choose a pure paint cleaner that does not leave a layer of protection as I believe AIO does? If AIO cleans and seals, I'm assuming that Z1 might not bond well with the AIO. Is that indeed the case?



Well, thanks to all for your input. Looks forward to conversing with you all again in the future. You are certainly a helpful bunch.



Well, on second thought, I might need to rethink that last statement. Upon further reflection, if anything, you all are probably just going to contribute to my delinquency. For instance, after reading many of the reviews, I'm now curious to try some of the products from 1Z, 4 Star and Jeff Werkstatt. Here I was happy with Zaino and now I once again find myself tempted to make sure the grass isn't greener elsewhere! :) But I guess that's the cross we autopians must bear.



Over and out,

Jason

'98 328i silver/black
 
simracer said:
Well, I've been reading through the archives quite a bit and must say that I've learned a great deal. However, I did have a few questions for you experts that I can't say I remember seeing answered as I've browsed back on the forum.



I've been a Zaino users for several years now. But one thing I've never really known is how often or under what circumstances one should go back and start over with Z1. And yes, I do still use Z1. Still haven't hopped on the ZFX bandwagon.
Click to expand...



ZFX is just another option for the usage of Z sealants. Z1 is still a viable alternative.



simracer said:
Assuming that the Zaino protection gained from Z1 and Z2 lasts 6 months or so, should one then go back and start over again with Z1? And if so, does that mean you should strip the protection again either by washing with Dawn, claying or a chemical cleaner so that Z1 can bond directly to the paint surface?
Click to expand...



If your paint is in good condition and does not need claying, cleansing or polishing, one can just apply a coat of Z1 and Z2/Z5. Z1 should be re-applied after every 8 - 10 coats of sealant or twice a year.



simracer said:
As for my other questions, I do recall seeing how many folks seem to have quite a time removing Klasse SG. Out of curiousity, is Klasse AIO as difficult to remove or is this just an issue with SG?
Click to expand...



AIO is very easy to buff off. Absolutely effortless.





simracer said:
Further, I see a great many folks are satisfied with the cleaning power of AIO. However, since I'm using Zaino, should I choose a pure paint cleaner that does not leave a layer of protection as I believe AIO does? If AIO cleans and seals, I'm assuming that Z1 might not bond well with the AIO. Is that indeed the case?
Click to expand...



To remove the protectant in AIO usage just wipe finish down with IPA (isopropyl alcohol). Application of Z1 will remove some of the protectant in AIO and will provide very good bonding if applied over a AIO prepped surface.
 
blkZ28Conv said:
AIO is very easy to buff off. Absolutely effortless.
Click to expand...

... IF you aply a thin layer ;) Also, use the WOWO method, which is to apply to one panel, and then buff off that panel right after, before moving to the next. If you apply to the whole car and let it cure, it can be a pain...
 
Z1 basically acts as a primer for the Z2pro to adhear to. Z1 is good for applying on single panels but if you're doing the whole car ZFX is quicker and better. You'd probably get better durability with ZFX as well.
 
Thanks all for the great information. I certainly appreciate your input. Maybe after I exhaust my supply of Z1, I might give ZFX a go.



Now to select a cleaner!
 
You must log in or register to reply here.
Back
Top