imported_GBG TL
New member
2007 BMW 530i
My wife just picked up a 2007 530 with 7K on the clock.
The car was suffering from buffer trails, swirls, and a few deep isolated scratches.
My neighbor and I detailed the Beemer this weekend using the following process:
Prep:
Dawn Wash
Clay
Wet Sanding: We had to wet sand a few deep scratches using 8000 & 12000 micromesh paper.
Polishing: John (mgm121499) ran the Metabo & Power Gloss @ 1800RPM in heavily marked areas, I ran the PC and UDM @ 5 using Menzerna Intensive polish, and the car was finished off with P085RD @ 1500-1000RPM.
Glass & Chrome and Wheels were polished using ZAIO,
After polishing, the car was wiped down with PGP Prep-Sol, and Dawn Washed again.
LSP:
Z5Pro x 2 (zfx’d) via a CCS finishing pad. CS was used to prime the pad.
Z2Pro x 1 using the same process as above.
Z6/Z8 mix used for the final wipe down.
Tires: Z16
Here are a few shots before-during-after.
Before:
During:
After:
Thanks everyone :usa
My wife just picked up a 2007 530 with 7K on the clock.
The car was suffering from buffer trails, swirls, and a few deep isolated scratches.
My neighbor and I detailed the Beemer this weekend using the following process:
Prep:
Dawn Wash
Clay
Wet Sanding: We had to wet sand a few deep scratches using 8000 & 12000 micromesh paper.
Polishing: John (mgm121499) ran the Metabo & Power Gloss @ 1800RPM in heavily marked areas, I ran the PC and UDM @ 5 using Menzerna Intensive polish, and the car was finished off with P085RD @ 1500-1000RPM.
Glass & Chrome and Wheels were polished using ZAIO,
After polishing, the car was wiped down with PGP Prep-Sol, and Dawn Washed again.
LSP:
Z5Pro x 2 (zfx’d) via a CCS finishing pad. CS was used to prime the pad.
Z2Pro x 1 using the same process as above.
Z6/Z8 mix used for the final wipe down.
Tires: Z16
Here are a few shots before-during-after.
Before:


During:




After:









Thanks everyone :usa