Will this process work?

C

CaliPhotog

New member
Alright... So I am seriously super busy these days. I am switching jobs and that seems to require a little bit of time. :nixweiss

Problem #1) I have very little time.

Problem #2) I park my car outside in a carport.

Problem #3) I must drive to and from work between applications.



Here is my attempt at a solution.



Evening #1 Wash and clay

Evening #2 Wash then PC polish SSR2.5 on Green Pad (Sonus DAS)

Evening #3 Wash then PC polish SSR1 on Green Pad (Sonus DAS)

Evening #4 Wash then PC polish SSR1 on Blue (Sonus DAS)

Evening #5 Wash then apply 1 layer RMG with PC Black LC pad remove with Sonus bonnet

Evening #6 Same as #5

Evening #7 Same as #6

Evening #8 Wash then apply Souveran with PC Black LC pad remove by hand



Long drawn out process, and I'm not sure if washing that much between coats will kill me. Please please offer your expert advise. Thanks
 
Alright... So I am seriously super busy these days. I am switching jobs and that seems to require a little bit of time. :nixweiss

Problem #1) I have very little time.

Problem #2) I park my car outside in a carport.

Problem #3) I must drive to and from work between applications.



Here is my attempt at a solution.



Evening #1 Wash and clay

Evening #2 Wash then PC polish SSR2.5 on Green Pad (Sonus DAS)

Evening #3 Wash then PC polish SSR1 on Green Pad (Sonus DAS)

Evening #4 Wash then PC polish SSR1 on Blue (Sonus DAS)

Evening #5 Wash then apply 1 layer RMG with PC Black LC pad remove with Sonus bonnet

Evening #6 Same as #5

Evening #7 Same as #6

Evening #8 Wash then apply Souveran with PC Black LC pad remove by hand



Long drawn out process, and I'm not sure if washing that much between coats will kill me. Please please offer your expert advise. Thanks
 
wannafbody said:
IMO you don't need 2 SSR1 steps and I'd recommend a sealant(for protection) under the PS
Click to expand...





Thanks. Which SSR1 step should I eliminate the Green or Blue, and also can you recomend a sealant that would work well with that combo?
 
wannafbody said:
IMO you don't need 2 SSR1 steps and I'd recommend a sealant(for protection) under the PS
Click to expand...





Thanks. Which SSR1 step should I eliminate the Green or Blue, and also can you recomend a sealant that would work well with that combo?
 
You must log in or register to reply here.
Back
Top