Which PC pads should I use with this system?

D

djmn

New member
Just got my PC and was wondering which pads to use with the following steps:

Step 1) Klasse AIO

2) Klasse SG

3) Klasse SG

4) S100

5) S100



Should the AIO be applied with a polishing pad or the finishing pad?

I was going to apply the SG by hand with the BillNorth method, I assume I need to let it cure 24hours before applying the second coat of SG?

Can I appy the S100 with a finishing pad? Again, I assume I should let it cure 24 hours before my second application of S100?

Thanks
 
Anything you can do by hand you can do with a PC, though many people prefer to apply their SG and p21S/S100 by hand.



Yes, 24 hours between coats of SG and S100. It's debatable whether the second coat of S100 will "layer", but there's no real reason NOT to do it.



I use a polishing pad with AIO, at speed 4-5. Some people prefer a finishing pad, but I'd only do that if the surface is already fully prepped with polishes, etc.



For applying LSPs like SG and waxes, I run the PC at 4-4.5 and use a finishing pad.
 
I use my white pad for AIO



I use a dedicated grey or black pad for SG



I use a dedicated orange pad for prelimary DACP work



the s100 topper, I used by hand.. but have stopped topping it as my Klasse finishes is more than fine for me :D
 
You must log in or register to reply here.
Back
Top