Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
What to follow after M105+LC CCS Orange?
- Thread starter LSC300
- Start date
LSC300 said:I just finished polishing my car with the above combo..its a Renaissance Red 1995 Lexus SC300. After polishing i noticed slight buffer trails and some marring. What would be the next 1 or 2 logical steps? btw i'm also using a PC7424
Ideally, go with #205 and a white LC pad. You can always use #80 if you have some around.
Jim
PresdntialDtail
New member
I would try 205 and a Megs 2.0 Black Finishing pad. I am getting hologram free results on a soft black nsx with the same method. (105/Megs 2.0 Polishing Pad and followed with 205/Megs 2.0 Finishing Pad).
PresdntialDtail
New member
Greedi said:Do they sell Megs 2.0 Polishing Pad over the counter, like AutoZone, Murray's or Pepboy's?
I dont think so. You can find them at a local paint supply store usually.
Greedi said:Do they sell Megs 2.0 Polishing Pad over the counter, like AutoZone, Murray's or Pepboy's?
I don't think so, but a body shop supply store should be able to get you one or two.
imported_Dave11
New member
Menzerna 106FF/FA with a white pad will work fine to clear those up......
If you want to three step it, PO 85RD or Ultrafina with a black/gray will finish it off nicely before you chose a wax or sealant.......
If you want to three step it, PO 85RD or Ultrafina with a black/gray will finish it off nicely before you chose a wax or sealant.......
wannafbody
wannafbody
ZPC
FP2
Ultrafina
M205
Optimum finishing polish
FP2
Ultrafina
M205
Optimum finishing polish
wannafbody said:ZPC
FP2
Ultrafina
M205
Optimum finishing polish
in that order?
all done by a pc 7424? if so, using what pads?
PresdntialDtail
New member
HOLTY said:in that order?
all done by a pc 7424? if so, using what pads?
No, those are all CHOICES for you as your finishing polish. You pick ONE of those for your last polishing step.
PresdntialDtail said:No, those are all CHOICES for you as your finishing polish. You pick ONE of those for your last polishing step.
ok, so then you still need a sealant/wax after that, correct?