What should I do with these dings/imperfections on my new (used) '06 is250?

leecm

New member
I recently bought an '06 is250, Onyx Black and it has some dings. The two main area's I'm concerned about are the hood and the back door on the passenger side. On the hood, there are small chips in the paint from pebbles or road debris. They're kind of little places where the paint has bubbled or raised up and cracked in one area of the bubble. The raised areas are no bigger in diameter than a pencils eraser tip. My questions and concerns for this are



1. Rust is a major concern, correct? I don't see any at the moment.

2. I bought a touch up paint pen from paintscratch.com. I got the one for paint and the one for clear coat. Will these take care of the issue or is there anything else I need to get to treat these areas?

3. Is it best to just fill in the parts that have cracked with the paint or am I supposed to take off the whole "bubble" or raised area first, then paint the hood underneath?



On the back passenger side door, there are a couple areas where it looks like there was a ding that left a white mark on the paint and someone tried to rub it off with something that scratched up the clear coat. The paint itself seems to be fine from what I can tell, but at the same time, I'm a TOTAL novice when it comes to paint/detail, so I could be wrong about that. Basically, these two areas just look dull at all times, because the clear coat is so scuffed up. Here are a couple pics.

SCROLL TO BOTTOM OF THREAD TO SEE BETTER PICTURES

The light colored "halos" you see around the white spots are scratches in the clear coat where someone tried to remove whatever kind of marks are there. Like I said, I think it's paint from another car or something. It doesn't look like the black paint is missing from these areas.





What do I need to fix this? Would polish or compound and a wax afterwards take care of this or is there another process that would be better?



Oh, and please excuse how dirty my car is. It has been raining some dirty, salty rain here lately in TN.
 
Well, the paint is shiny!



Can you put a piece of tape next to the imperfections? Sometimes it helps the camera focus and can give us a better idea of what we are looking at.



To make chips better you have two options:

-Touch up/sand/polish

-Repaint.



If paint is bubbling, and you want it fixed, the only real option is repaint.



I would avoid using waxes that dry with any kind of residue, it will only highight imperfections.
 
Well as already stated try marking the chips. so we can look at it better.



And show a pic of the ding too.



If its a real small ding. You may need PDR (paintless dent repair)
 
Ok, maybe these are better? Any tips would be appreciated!
 

Attachments

  • photo 3.jpg
    photo 3.jpg
    69.1 KB · Views: 21
  • photo 4.jpg
    photo 4.jpg
    94.6 KB · Views: 20
  • photo 2.jpg
    photo 2.jpg
    141.8 KB · Views: 28
  • photo 5.jpg
    photo 5.jpg
    114.6 KB · Views: 22
Bump. Can I get these out with a DA, a cutting pad, and some megs M105 or should I not even bother trying?
 
Back
Top