What did you do detailing wise today?

the green tape was purchased from ACC (I find it releases MUCH easier than the blue tape from lowes (3m brand)

I have different sizes etc

I used the green on the edges b/c I had a few strips left over from masking off the doors (then used the much wider blue tape to fill in the gaps)

that green tape was purchased specifically because my blue 3m delicate surfaces tape will leave a little bit of residue on the rubber if left on for more than an hour

the green tape does not leave the same residue and is also the perfect width for a lot of the mopar vinyl my buddies use

Good to know, looks like It`ll be in my next order THANKS
 
589b741035f0d8ce04ee888f8cb84d61.jpg


still a little more to go
 
Geez Don that`s a lot of real estate. At least it`s flat. Looks like a job for a mark2 21 or boss21

Sent from my SM-G900P using Tapatalk
 
48bf80c87f9e3f905ef50996951fd003.jpg


just Adapt on a UHS pad with duetto and blue pad with my nano

Just need drivers side then its time for essence and call it a day

I really enjoy being able to take my time on this detail









Sent from my SM-G900P using Tapatalk
 
Opened the garage to get a few essence only pics before i have lunch and then start applying CSL
a0b8d5b0aa3d61e229334fe8cb088bb3.jpg


d6f4a38523a6b2dcda7dcc2bf542fff4.jpg


7ef685cb627d9455d7c20f3d17e102a5.jpg


d3e22c4b297d6904dbe599d094945fce.jpg


55230cb4bf89a8d96c9ff28a620ff6bf.jpg


Sent from my SM-G900P using Tapatalk
 
Took a little getting used to but csl is pretty easy when applied in small sections. Worst part is trying not to drop the glass vile and dropper- yikes!

ea374b9fdeeba8f8955e80250d624b4e.jpg


496c972ed43715c5f8d81d75e8b581dd.jpg


5152a9f29e271f865b403c9297785bf5.jpg


Video...csl is on hood, roof, trunk and all of passenger side.

My lc coating applicator got super slick so i tossed it and made a sandwhich to eat, stupid lunch/dinner thread made me hungry, haha.

https://youtu.be/wf6DwoUIuec

I`ll be honest, I left it too long on the top of the passenger doors and it took essence + blue rupes pad on my Nano (speed5) and firm pressure to get it off, fixing to reapply those areas.

Note to self-dont get cocky and try to do an entire door at once. :/



Sent from my SM-G900P using Tapatalk
 
What pad?

Sent from my SM-G900P using Tapatalk
actually used a lc orange pad on my gg6. the finish was pretty beat, daily driver that sits outside most of the time. i was very surprised how slick the finish became after the sealant, probably the slickest i`ve ever felt.
 
I took one of my dogs to the vet today for her annual checkup, when I got home I "de-dog haired" the interior of my truck.
Ever care`s FurErase, a vacuuming and Folex made the truck nice again. :cool:
 
I took one of my dogs to the vet today for her annual checkup, when I got home I "de-dog haired" the interior of my truck.
Ever care`s FurErase, a vacuuming and Folex made the truck nice again. :cool:

Have you ever tried a pet hair removal "stone"?
 
Ugh i give up on these tail lights
Before
28d0fb5d798b771f037c2dee7008ce9e.jpg


6c587c92143119aded65910a7aa20432.jpg


53b73a55a00823bbe7fa3bef96a9c01e.jpg


Spent over an hour on those dang tail lights alone. Used two entire nano batteries up

The clear parts are almost perfect but th black is improved a lot but still not where id like it. Too afraid to go more aggressive though.

hoping the coating holds up there

Should i open up dlux for this?
Its uncoated right now

Sent from my SM-G900P using Tapatalk
 
Much deserved uber rw, dried then topped with liquid Souveran spray

Happy SRT (no wheels, hot as heck outside)

eb701253b30de24f9ced96a3e3da078f.jpg


c2f676c76d60773e958eacd4e7ec1122.jpg


1984995f4d1a2604627745e8123efe35.jpg


d4d82c6795bfdbd936a42094740cb1c5.jpg


Sent from my SM-G900P using Tapatalk
 
IMG_2341_1.jpg

IMG_2344_1.jpg

IMG_2345_1.jpg

IMG_2346_1.jpg


putzing on my dads car, used gg 6" with a 5" backing plate and cg mf pad and bf src compound, and followed with lc 5" orange thin pro with menzerna po 91e extensive polish
 
Back
Top