What are Poorboy's top 3 bestsellers?

Souveran doesn't bond well with EX-P?
Is Natty's a better choice over ex-p?
Or should I use EX instead of EX-P if topping w/ Carnuba?
 
Last edited:
I recently applied Souveran over EX-P and did not experience any bonding issues. However, I don't normally top with any carnauba until at least a week after my last coat of sealant.

Regarding your streaking problem, you may have some contaminants (oils) in your towels. Be sure that you do not use fabric softener or dryer sheets when washing your detailing towels. Another thought is that you may have silicones on your finish from another brand of QD. My daily QD solution is a mix of S&W and Meg's Final Detail (with silicone). I find that I have to wipe more carefully and more quickly to avoid streaking with the mixture that I do with S&W alone.
 
awd330 said:
I recently applied Souveran over EX-P and did not experience any bonding issues. However, I don't normally top with any carnauba until at least a week after my last coat of sealant.

Regarding your streaking problem, you may have some contaminants (oils) in your towels. Be sure that you do not use fabric softener or dryer sheets when washing your detailing towels. Another thought is that you may have silicones on your finish from another brand of QD. My daily QD solution is a mix of S&W and Meg's Final Detail (with silicone). I find that I have to wipe more carefully and more quickly to avoid streaking with the mixture that I do with S&W alone.
Click to expand...

My process was wash, Clay, SSR1, Ex-p x 2 (24 hours apart). Wait 2 weeks. Souveran.
This was the first wash since the wax. About 2 weeks after Souveran. No other QD was used. The car was medium dirty, but not too bad. The car is black so it shows everything. The hood was the only place I noticed the streaking. And now (a few days later) the streaks have a slight whitesh haze to them. This suggests to me, that maybe there is in fact wax in the streaks. Is it possible that something in the dust or dirt being removed may have interacted with the Souveran and removed some of it? Maybe the car was a little too dirty for the S&W wash. I didn't think so at the time.

I apologize for leading this thread off of the original subject awhile back.
 
gnev8 said:
My process was wash, Clay, SSR1, Ex-p x 2 (24 hours apart). Wait 2 weeks. Souveran.
This was the first wash since the wax. About 2 weeks after Souveran. No other QD was used. The car was medium dirty, but not too bad. The car is black so it shows everything. The hood was the only place I noticed the streaking. And now (a few days later) the streaks have a slight whitesh haze to them. This suggests to me, that maybe there is in fact wax in the streaks. Is it possible that something in the dust or dirt being removed may have interacted with the Souveran and removed some of it? Maybe the car was a little too dirty for the S&W wash. I didn't think so at the time.

I apologize for leading this thread off of the original subject awhile back.
Click to expand...
If the streaking only occurs on your hood, then a contaminated towel is probably not the culprit. Perhaps some of the Souveran residue was not fully wiped off, or you may have missed some spots when applying Souveran? Could there have been some overspray from a tire or trim dressing that reached the hood?
 
You must log in or register to reply here.
Back
Top