Using UPP and KSG together?

S

scooch

PC @ 6 = Ludicrous speed
I have heard UPP is the slickest stuff around with a nice deep wet look to it but KSG kills it on the durability end. Would UPP bond to KSG or vice versa? I want to try and combine the deepness and slickness of UPP with the durability of KSG.
 
yes if there is a ""CLEAN"" serface it will bond really Upp bonds to VM which is a glaze so it would have NP clinging to another sealent
 
I can see UPP bonding to SG but I don't think SG would bond to UPP. I find UPP to be very oily and SG won't bond to this type of surface. There are some who say they can alternate coats of SG and UPP but I didn't have much luck.
 
If you were going to use both, there is no reason to put SG OVER UPP anyway. You want the durability of SG and the slickness of UPP, so obviously you would need to apply UPP on top of SG in order to feel the slickness of it.

It is extremely slick too, you'll love it!
 
whitemax - The only reason i would want to try and apply UPP before SG was because I hear it looks very deep and wet...and I am not sure if I apply say 3 layers of SG and then UPP ontop I would be able to extract that deep, wet look.



I agree that for the durabliity I should apply the SG first and then get that slick feel of UPP ontop....I was thinking since UPP is so slick there has to be some oils in it which would make it a little more difficult for SG to bond to it.



So the new question is: Can I still get the deep wet look from UPP if applied ontop of multiple layers of SG?
 
scooch said:


So the new question is: Can I still get the deep wet look from UPP if applied ontop of multiple layers of SG?
Click to expand...



I find the paint takes on the appearance of the last product you apply. If you think UPP looks deep and wet it still will over SG.
 
stevet said:
I can see UPP bonding to SG but I don't think SG would bond to UPP. I find UPP to be very oily and SG won't bond to this type of surface. There are some who say they can alternate coats of SG and UPP but I didn't have much luck.
Click to expand...
stevet is correct..UPP tops SG nicely....Let the SG cure for at least 24 hrs though. It's a dynamite combo:up
 
Thanks everyone...def. going to give this a whirl. I have UPP coming in tomorrow :D Never used it before. and I put a layer of KSG on last night. Going for a total of KSGx3 and UPPx2. Ill try and take pics as I go to show any progress...i am still newbie so my eye is not quite honed yet... :o Cant wait to see how this turns out. Oh and by the way...I had AIO and KSGx1 and S100x1 on the car previously but I stripped it all down by repolishing it last night with SSR1, had some micro-marring I wanted to get rid of also, and I put down AIO before the KSG....cant forget the AIO :xyxthumbs
 
You must log in or register to reply here.
Back
Top