Used Menzerna, still have defects, what to use?

S

ScoobyDrew06

New member
Hey guys,



My girlfriend has a dark blue jetta, it looks likes someone washed it with a brillo pad. Anyways I tried to see what I could do with her paint so I taped off half of her hood. Started with Menzerna Intensive Polish w/ Sonus DAS Orange on my PC set at 4. I went over the area 3 times with that. It was enough to get the lighter stuff out, but the heavier defects were still there. What pad and or polish/compound should I use to get the heavier defects, I was kind of dissapointed at how the intensive polish didn't completely smooth the paint since it was my first time using it, maybe it's the pad???



Anyways I followed up with Final Polish II, Then Klasse AIO, and some quick Natty's Blue to see what the rest of the car could look like. I had to wash her car afterwards to get the splatter off of the panels that I did not polish, it was funny to see half of her hood bead up and a distinct line down her hood.
 
I use Menzerna all the time with my PC and get great results. As Five Star said though, you need to bump the speed up to at least 5 and if the defects are bad then 6. Any brand of polish will do very little correction at speed 4. Also, be sure you are moving the polisher slowly (~1 inch per second) and that you are overlapping your passes ~50%. I also HIGHLY recommend you give the pad a few sprays of QD before each application of polish. This will increase the working time of the polish as Menzerna tends to flash quickly.
 
ScoobyDrew06 said:
Hey guys,



My girlfriend has a dark blue jetta, it looks likes someone washed it with a brillo pad. Anyways I tried to see what I could do with her paint so I taped off half of her hood. Started with Menzerna Intensive Polish w/ Sonus DAS Orange on my PC set at 4. I went over the area 3 times with that. It was enough to get the lighter stuff out, but the heavier defects were still there. What pad and or polish/compound should I use to get the heavier defects, I was kind of dissapointed at how the intensive polish didn't completely smooth the paint since it was my first time using it, maybe it's the pad???



Anyways I followed up with Final Polish II, Then Klasse AIO, and some quick Natty's Blue to see what the rest of the car could look like. I had to wash her car afterwards to get the splatter off of the panels that I did not polish, it was funny to see half of her hood bead up and a distinct line down her hood.
Click to expand...



Also if you are getting splatter you might be using too much polish. (just a thought) Always keep the PC pad flat against the paint while in use to prevent splatter and bump it up to 6 like Mikey and Five Star have suggested. Let us know how it turns out. (good idea to always perform a test spot first :2thumbs: )
 
Try a Yellow Cutting Pad with a spritz (or 2) of water and the PC and IP. This works well on medium swirls/defects when an Orange pad doesn't do it. Followup with a White Polishing pad and FP II if needed.



If that don't do it you may need PowerGloss + PC or IP + Rotary as mentioned.
 
You must log in or register to reply here.
Back
Top