ssr2.5 with 3m fine cut rc

[mopar or nocar]

i have a red dodge ram truck and its got some swirls on it. Can i use some ssr2.5 with the 3m fine cut rubbing compound or not? should i use the 3m first or the ssr2.5 first over the whole truck, i was gonna use some 3m swirl mark remover for dark cars after these abrasives then topping it all off with nxt liquid. let me know if i can use those too or should i get the ssr1 and use that instead

 

[jaybs02]

Mopar how bad are your swirls?
Are you doing this by hand?

I would first try some of the SSR2.5 and see it that works, before moving up to a compound, you might want to follow up with a milder swirl mark remover to remove any hazing that you might get from the SSR2.5

Then top with the NXT.

HTH
"J"

 

[mopar or nocar]

they arent that bad but considering i have coats of wax/polish on it they are probably worse that what is being shown. i am doing it with my pc 7336sp that i just bought with some wolfgang pads that will be coming from autogeek with my ssr2.5