I don't like bird crap on my car. It looks terrible and it's bad for the paint. Is there any good way to spot clean bird crap off a car without washing the entire exterior? Sometimes I don't have time for a full ONR wash but don't want to leave the waste on my vehicle which could potentially damage the paint.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Spot cleaning bird waste?
- Thread starter MattB
- Start date
AeroCleanse
New member
Use ONR in the Quick Detailer mix, spray on and wipe off with a MF towel.
Bigpoppa3346
New member
AeroCleanse said:Use ONR in the Quick Detailer mix, spray on and wipe off with a MF towel.
+1
Just make sure to thoroughly soak the crap before wiping. Also, as you are wiping it up, "roll" the MF upwards (like a steamroller in reverse) so you are not dragging the mess along the paint and marring it.
Accumulator
Well-known member
Besides ONR, FK146 works well for this.
Besides using enough product to affect a solvent action while not getting it all over, the real trick is getting the [stuff] transfered from the paint to the MF/whatever without marring the paint (good method you posted there, Bigpoppa3346). Remember that bird droppings are usually quite abrasive.
Besides using enough product to affect a solvent action while not getting it all over, the real trick is getting the [stuff] transfered from the paint to the MF/whatever without marring the paint (good method you posted there, Bigpoppa3346). Remember that bird droppings are usually quite abrasive.
JohnKleven
New member
Auto Glym makes "bird dropping wipes". It comes with 10 individually wrapped sachets in a box, similar to a moist towlette. Just keep them in your glovebox for whenever you need them
imported_ErnDog
New member
Some QD as other have said,rinse of and wipes with a clean MF.
Another +1 to ONR at QD strength.
Soak the dropping with the solution until it is soft and liquefied. For PITA droppings, in addition to soaking the dropping, soak a MF with the solution and set it on top of the affected area (adding a few more shots of ONR QD between the MF and dropping).
Make sure to dab the dropping when removing, don't wipe (as Bigpoppa3346 and Accumulator noted). 90% of bird species ingest sand and gravel to aid in digestion so the sand and gravel is in the dropping and will mar the finish if wiped.
That being said, I've had some droppings that have been on my finish for less than 30 minutes and etched the finish. Other droppings have been on the finish for a couple hours with no damage. A lot has to do with the species and diet of the bird that bombed your finish. The good news is that the droppings that etched my finish were able to removed with a good polish after a few months.
Hope this helps.
Soak the dropping with the solution until it is soft and liquefied. For PITA droppings, in addition to soaking the dropping, soak a MF with the solution and set it on top of the affected area (adding a few more shots of ONR QD between the MF and dropping).
Make sure to dab the dropping when removing, don't wipe (as Bigpoppa3346 and Accumulator noted). 90% of bird species ingest sand and gravel to aid in digestion so the sand and gravel is in the dropping and will mar the finish if wiped.
That being said, I've had some droppings that have been on my finish for less than 30 minutes and etched the finish. Other droppings have been on the finish for a couple hours with no damage. A lot has to do with the species and diet of the bird that bombed your finish. The good news is that the droppings that etched my finish were able to removed with a good polish after a few months.
Hope this helps.