Sonus Acrylic Spritz Alternatives?

D

dmehak

New member
Because Sonus products aren’t readily available in Canada, I was wondering what the alternatives are for Sonus Acrylic Spritz (to use on top of the Klasse Twins).



I remember reading somewhere about mixing distilled water and SG…
 
It appears that Chemical Guys makes/sells an acrylic sealant spray called blitz or something of the sort, maybe that's easier to find for ya. I've never tried it though, have no idea if it's good or not.
 
I hadn’t heard of Menzerna High Gloss Acrylic Shield before - and it’s available in Canada.



Anyone ever used it?
 
Think I'll try the Menzerna High Gloss Acrylic Shield, I'd prefer to use an acrylic based product on top of the Klasse Twins rather than an OTC QD.



So this will be used as my QD, but should I also use it to mist the paint and applicator when applying Klasse?



Thanks.
 
dmehak said:
Think I'll try the Menzerna High Gloss Acrylic Shield, I'd prefer to use an acrylic based product on top of the Klasse Twins rather than an OTC QD.



So this will be used as my QD, but should I also use it to mist the paint and applicator when applying Klasse?



Thanks.
Click to expand...



The best time to use the HGAS is after a wash.
 
I believe I'm having great success with a homebrew glanz of 2-3 parts distilled water to 1 part of KSG.

After washes, I've sprayed on and wiped off.
 
abbeysdad said:
I believe I'm having great success with a homebrew glanz of 2-3 parts distilled water to 1 part of KSG.

After washes, I've sprayed on and wiped off.
Click to expand...



Yes, this works great and is at least a way to use up some of that SG that would otherwise sit around for about five years or so. I like the 3 to 1 ratio.



Menzerna HGAS, Duragloss AW, Wolfgang's Spray Sealant and Werkstatt's AG (in that order) are some highly respected products that will work very well over SG.
 
So when applying the twins:



Use 1oz AIO : 16oz Water mixture to prime the applicator for the AIO.



And use 1oz SG : 3oz Water mixture to prime the applicator for the SG?





Or should I be using the 1oz SG : 3oz Water mixture to prime the applicators for both products?
 
I usually just apply more KSG if I think it's needed, but FK 425 after a wash does give a nice boost in slickness and even a slight improvement in looks. Not sure if FinishKare ships to Canada though.



I slightly dampen my AIO applicator with water, but for KSG I only use KSG on the applicator, no water.
 
Put 2 ounces of either All in One or Sealant Glaze in a 16 Oz. bottle then fill the rest up with water. This is a great spritz for restoring the shine after washing, and is much faster to apply.
 
You must log in or register to reply here.
Back
Top