Sneak Peek vs. Shelby GT500

S

ScubaStevo

New member
Updates and pictures down a couple posts



I'll have to tease you guys for a little bit. two pictures of the GT500 I completed yesterday.The undercarrage will be completed before delievery to the owner. (The dealer sure hacked this one).



Total time so far: 15 hours



My process is:



XP Compound via rotary and cutting pad at 900 RPM

Power Cut Plus via rotary and polishing pad at 1200 RPM

Power Cut Plus via rotary and finishing pad at 1000 RPM

GS1 via rotary and polishing pad at 1500 RPM

GS1 via rotary and finishing pad at 800 RPM (slower RPM and slower, flatter passes help for no holograms)

Collonite 476S



Tuxedo on the tires, and GS1/Awsome Gloss on the rims.

Degreased the wheel wells with Red Power degreaser.



Got a 2002 ZO6 and a nice 1990 Mustang out of this deal.



2007MustangShelbySVT002.jpg


2007MustangShelbySVT004.jpg
 
Saw one like the one you did about 1 hr ago when walking my dogs and it was very sweet looking GT500!
 
My process is:



XP Compound via rotary and cutting pad at 900 RPM

Power Cut Plus via rotary and polishing pad at 1200 RPM

Power Cut Plus via rotary and finishing pad at 1000 RPM

GS1 via rotary and polishing pad at 1500 RPM

GS1 via rotary and finishing pad at 800 RPM (slower RPM and slower, flatter passes help for no holograms)

Collonite 476S



Tuxedo on the tires, and GS1/Awsome Gloss on the rims.

Degreased the wheel wells with Red Power degreaser.



Got a 2002 ZO6 and a nice 1990 Mustang out of this deal.



More Pictures:

002.jpg


2007MustangShelbySVT003.jpg


2007MustangShelbySVT021.jpg


005.jpg


012-1.jpg


015.jpg


019.jpg




The only part on the car that has the slightest scratch. It looks like a cats paw.

020.jpg
 
You must log in or register to reply here.
Back
Top