ScheerSpeed
New member
This car is one-off color, and the only one of it's kind. What a beautiful color it was to see in person after i was finished detailing it.
The car was picked up around October, but had only been driven about 300 miles. However, there were some signs that i thought were compounding scratches from a wool pad after wetsanding. Whether this was done at the factory, or by another detailer, i do not know. However there weren't many RIDS, and 100% of the defects came out with two passes of SIP on the Detailer's Domain Uber Orange foam pad. Then followed with 85RD left the surface glistening.
Now enough of me writing... onto the good stuff! PICS! and over 100 of them!
Exterior
-Wash
-1Z Anti Insekt
-CG CWC
-Meg's mitt
-P21s TAW
-Wheels
-CG CWC
-P21s Gel
-EZ detail brush
-Swissvax wheel brush
-DD World's Best Boar's Hair brush
-ARO (tires)
-Wheel Wells
-Meg's APC+
-DD wheel well brush
Clay
-Special yellow poly clay
-ONR lube
Polishing
-Exterior paint
-Menzerna SIP via Orange Uber pad @ 1000-2000RPM (2 passes)
-Menzerna PO85RD via blue Uber pad @ 1000-2000RPM
-Makita 9227C
-3M Yellow Foam Backing Plate
-1000w halogen lights
-ISA 50/50 wipedown
-DD Uber MF towels
LSP
-Paint
-Swissvax Cleaner Fluid
-Swissvax Mystery (2 coats)
-FK1# 425
-CG 530XL MF towels
-Wheels
-FK1# 425
-CG Barebones (wheel wells)
-Swissvax Pneu
-Engine
-P21s TAW
-Swissvax Cleaner Fluid
-Swissvax Autobahn
-1Z Chrome Polish (muffler)
Glass
-Stoner's Invisible Glass
Interior
-1Z Cockpit Premium
-Swissvax Mystery (Carbon Fiber Parts)
-Leather Master Trio (non-alcantra parts)
Here she is before. Just taken out of a car cover. There really wasn't much dirt on the car at all, however the paint needed correction badly.
now that looks like wool pad compounding marks to me....
Some wax left around the clear bra by a previous detailer.
more buffer trails!
i then washed the car using Chemical Guy's Citrus Wash n Clear to strip the P21s Wax that had been applied before. then after the wash i pulled the car back into the garage area to clay it. I was really surprised to see how contaminated the paint was considering it was such a new car!
So after claying the entire car, except for the areas that had clear bra, i taped up all the clear bra edges, and any trim peices that would be in the vicinity of the polishing pad.
and now some pictures with the halogens
the rear carbon fiber peice looked really hazy.

The car was picked up around October, but had only been driven about 300 miles. However, there were some signs that i thought were compounding scratches from a wool pad after wetsanding. Whether this was done at the factory, or by another detailer, i do not know. However there weren't many RIDS, and 100% of the defects came out with two passes of SIP on the Detailer's Domain Uber Orange foam pad. Then followed with 85RD left the surface glistening.
Now enough of me writing... onto the good stuff! PICS! and over 100 of them!
Exterior
-Wash
-1Z Anti Insekt
-CG CWC
-Meg's mitt
-P21s TAW
-Wheels
-CG CWC
-P21s Gel
-EZ detail brush
-Swissvax wheel brush
-DD World's Best Boar's Hair brush
-ARO (tires)
-Wheel Wells
-Meg's APC+
-DD wheel well brush
Clay
-Special yellow poly clay
-ONR lube
Polishing
-Exterior paint
-Menzerna SIP via Orange Uber pad @ 1000-2000RPM (2 passes)
-Menzerna PO85RD via blue Uber pad @ 1000-2000RPM
-Makita 9227C
-3M Yellow Foam Backing Plate
-1000w halogen lights
-ISA 50/50 wipedown
-DD Uber MF towels
LSP
-Paint
-Swissvax Cleaner Fluid
-Swissvax Mystery (2 coats)
-FK1# 425
-CG 530XL MF towels
-Wheels
-FK1# 425
-CG Barebones (wheel wells)
-Swissvax Pneu
-Engine
-P21s TAW
-Swissvax Cleaner Fluid
-Swissvax Autobahn
-1Z Chrome Polish (muffler)
Glass
-Stoner's Invisible Glass
Interior
-1Z Cockpit Premium
-Swissvax Mystery (Carbon Fiber Parts)
-Leather Master Trio (non-alcantra parts)
Here she is before. Just taken out of a car cover. There really wasn't much dirt on the car at all, however the paint needed correction badly.




now that looks like wool pad compounding marks to me....


Some wax left around the clear bra by a previous detailer.

more buffer trails!


i then washed the car using Chemical Guy's Citrus Wash n Clear to strip the P21s Wax that had been applied before. then after the wash i pulled the car back into the garage area to clay it. I was really surprised to see how contaminated the paint was considering it was such a new car!

So after claying the entire car, except for the areas that had clear bra, i taped up all the clear bra edges, and any trim peices that would be in the vicinity of the polishing pad.


and now some pictures with the halogens





the rear carbon fiber peice looked really hazy.
