The process:
-Eagle One Car wash soap and wool mit to remove the dirt
-Meguiar's Quick Detailer the car to inspect the car for the bad areas/scratches/the stuff on the hood
-Meguiar's Clay bar the whole car with the quick detailer as the lubricant
-Then Evercoat Triple Cut Compound (P/N 100019, 1200 and finer fast cut to a fine finish) on the bad spots with 3M Waffle Pad (Black)
-Quick Detail the car to make sure all bad areas were addressed and fixed
-3M Fine Cut (P/N 06060) with 3M Waffle Pad (Black)
-Quick detail to inspect again
-3M Ultrafina (P/N 06068) with Blue Ultrafina specifi pad. (This stuff is GREAT and gies it amazing depth)
-Quick Detailer for final inspection
-The Meguiar's Cleaner Wax (I love this stuff and it really brings the slickness out in the paint) Removed with 3M Black Finish Pad.
-Then Finally Meguiar's Gold Class Paste Wax applied by hand and removed with 3M Black Finish Pad.
Then the windows get cleaned then Rain X'd, the trim all gets dress, and the interior gets cleaned. The wheels all get hand cleaned, waxed and buffed.