colinpd137
New member
Hi everyone,
I decided to jump at the chance of the 3D / HD "product giveaway for a review" as Iv'e never had the pleasure of trying
any products from them. Out of all the products I browsed through, I chose Nitro Seal because it looked like a nice addition to possibly add to my menu
(pending results) for the customers that don't want to shell out $600+ for Opti-Guard but still wanted a decent length of protection.
Background: I'm an owner of my own shop in New Braunfels, TX.
I'm 21 yrs old, & a full-time detailer.
Home
facebook.com/colinsautodetailing.com
July 30th, 2013
Product Claim: HD® Nitro Seal is a revolutionary two part copolymer paint sealant system that is designed to be used by everyone who owns a vehicle. It is easily applied by hand; so anyone can do it.
No need for endless manuals, polishers, or equipment. HD® Nitro Seal will make your car look newer than when you bought it.
HD® Nitro Seal, a revolutionary two-part co-polymer synthetic paint sealant technology, is designed to offer the ultimate paint protection available while delivering a superior “Melted Glassâ€� like effect to the paint. This patented system is the first of its kind. HD® Nitro Seal offers the best in paint protection in the industry. Its extreme water beading properties and polymeric shield will repel contaminants and keep vehicle clean for longer periods of time. Can be used on all exterior hard surfaces of automobiles including glass, metal, chrome, and wheels.
Each bottle is carefully topped with nitrogen gas for ultimate preservation of our leading edge technology. Part A provides excellent surface affinity and spread ability through its incredible wetting feature, helps to anchor the product to the car paint. When Part B is applied over Part A, the two chemicals will react and cure to a superior hard protective coating.
Reference: 3D International, LLC :: Waxes :: HD Nitro Seal
Kit Contains
- 1 HD Nitro Seal Part A
- 1 HD Nitro Seal Part B
- 1 Red Applicator
- 1 Black Applicator
- 1 Microfiber Towel
- 1 Latex Glove
- 1 Instruction Sheet
After opening the box, inspecting everything I have a couple things to say about some items included in the box,
both good & bad. I will mention it at the end of the post.
Instructions:
Part A: Expected to be more in the canister but hey, no complaints here. A little goes a long way.
I decided to just do a section of my hatch because iv'e never used this product before & not knowing the "look" it would give as well as durability. Also time is a factor.
Right after application, Part "A" was one of the smoothest applications iv'e ever had when touching an applicator to paint with an LSP. Literally just glides over as smooth as butter.
Now time for Part B!
Not at all grabby, very smooth (nothing like part A) but still a nice easy application.
Now i'm letting it cure
Notes:
- I let it cure for 1 Hour
- I spread it out using circular motion, then leveled it with a cross-hatch pattern for even coverage
- I used my own gloves, & microfiber towel.
Bled through the tape a little, no worries.
Removal: Was a bit tough to remove excess, but then again I think I used a bit to much "PART A"
Durability: Will be testing it over the coming months while leaving it like this, to see if it can withstand the elements of everyday driving & staying outside.
Now to go over some of the items included with the kit.
Applicators: Very good! nice design with an easy grip.
MF Towel: This area could use some work, I would included a better grade MF towel in the box rather than a Kirkland Towel from Costco. Great towels for interior don't get me wrong I use those all the time. but I won't touch paint with it.
Canisters: I like the idea. BUT, in the directions it says only to apply a few drops. Which is a bit hard to do when its just a cap on top. I would suggest including some kind of dripper nozzle or some plastic piece you could screw on to the canister to make putting on the applicators a lot more efficient.
Verdict: Overall I'm pretty happy with the look it gave, very close to Blackfire BlackIce (which is one of my favorite LSPS now) so thumbs up in that area. I'm sure it has to do
with the Montan Wax in Part B, very good stuff. As this was my first 3D Item to ever try, I have to say I might be missing out one some good bulk products they have to offer given the results with this. So
i'm inclined to try another!
If there is a 3D / HD product you want a review on please let me know, I could use some swaying on what to try next.
Thanks for reading!
- Colin
I decided to jump at the chance of the 3D / HD "product giveaway for a review" as Iv'e never had the pleasure of trying
any products from them. Out of all the products I browsed through, I chose Nitro Seal because it looked like a nice addition to possibly add to my menu
(pending results) for the customers that don't want to shell out $600+ for Opti-Guard but still wanted a decent length of protection.
Background: I'm an owner of my own shop in New Braunfels, TX.
I'm 21 yrs old, & a full-time detailer.
Home
facebook.com/colinsautodetailing.com
July 30th, 2013
Product Claim: HD® Nitro Seal is a revolutionary two part copolymer paint sealant system that is designed to be used by everyone who owns a vehicle. It is easily applied by hand; so anyone can do it.
No need for endless manuals, polishers, or equipment. HD® Nitro Seal will make your car look newer than when you bought it.
HD® Nitro Seal, a revolutionary two-part co-polymer synthetic paint sealant technology, is designed to offer the ultimate paint protection available while delivering a superior “Melted Glassâ€� like effect to the paint. This patented system is the first of its kind. HD® Nitro Seal offers the best in paint protection in the industry. Its extreme water beading properties and polymeric shield will repel contaminants and keep vehicle clean for longer periods of time. Can be used on all exterior hard surfaces of automobiles including glass, metal, chrome, and wheels.
Each bottle is carefully topped with nitrogen gas for ultimate preservation of our leading edge technology. Part A provides excellent surface affinity and spread ability through its incredible wetting feature, helps to anchor the product to the car paint. When Part B is applied over Part A, the two chemicals will react and cure to a superior hard protective coating.
Reference: 3D International, LLC :: Waxes :: HD Nitro Seal
Kit Contains
- 1 HD Nitro Seal Part A
- 1 HD Nitro Seal Part B
- 1 Red Applicator
- 1 Black Applicator
- 1 Microfiber Towel
- 1 Latex Glove
- 1 Instruction Sheet
After opening the box, inspecting everything I have a couple things to say about some items included in the box,
both good & bad. I will mention it at the end of the post.
Instructions:
Part A: Expected to be more in the canister but hey, no complaints here. A little goes a long way.
I decided to just do a section of my hatch because iv'e never used this product before & not knowing the "look" it would give as well as durability. Also time is a factor.
Right after application, Part "A" was one of the smoothest applications iv'e ever had when touching an applicator to paint with an LSP. Literally just glides over as smooth as butter.
Now time for Part B!
Not at all grabby, very smooth (nothing like part A) but still a nice easy application.
Now i'm letting it cure
Notes:
- I let it cure for 1 Hour
- I spread it out using circular motion, then leveled it with a cross-hatch pattern for even coverage
- I used my own gloves, & microfiber towel.
Bled through the tape a little, no worries.
Removal: Was a bit tough to remove excess, but then again I think I used a bit to much "PART A"
Durability: Will be testing it over the coming months while leaving it like this, to see if it can withstand the elements of everyday driving & staying outside.
Now to go over some of the items included with the kit.
Applicators: Very good! nice design with an easy grip.
MF Towel: This area could use some work, I would included a better grade MF towel in the box rather than a Kirkland Towel from Costco. Great towels for interior don't get me wrong I use those all the time. but I won't touch paint with it.
Canisters: I like the idea. BUT, in the directions it says only to apply a few drops. Which is a bit hard to do when its just a cap on top. I would suggest including some kind of dripper nozzle or some plastic piece you could screw on to the canister to make putting on the applicators a lot more efficient.
Verdict: Overall I'm pretty happy with the look it gave, very close to Blackfire BlackIce (which is one of my favorite LSPS now) so thumbs up in that area. I'm sure it has to do
with the Montan Wax in Part B, very good stuff. As this was my first 3D Item to ever try, I have to say I might be missing out one some good bulk products they have to offer given the results with this. So
i'm inclined to try another!
If there is a 3D / HD product you want a review on please let me know, I could use some swaying on what to try next.
Thanks for reading!
- Colin
