LeMarque
New member
Who'da thunk a Hyundai could be considered a luxury car. But This AWD, Pamploma Red Genesis sure gave me the impression of being one. But a bit of the back story before I move on to HD Nitro.
This particular car was purchased from a Colorado dealership site unseen, picked up at nite and driven down to Santa Fe by the owners son.
Not only did it arrive with buffer trails, swirls and scratches in the most unusual places, but there was even compound splatter on the INSIDE of the rear windsheild!
Unfortunately, as is typical, since the dealer was only willing to pay a miserly amount for correction, and the owner wasn't willing to cough up the difference for a full correction, I did a one step using HD Adapt (mostly 'cause I just can't find a place for it in my arsenal and needed to use it up - Sorry HD) and my CHUPES - which I'm really not pleased with after all - and a Buff & Shine Blue Polishing Pad.
So on to the Review -
From the HD site:
Take your car's paint to another level!
Unprecedented slickness & shine
Revolutionary, Patent Pending, two part polymer paint sealant system
Super easy to apply!
HD® Nitro Seal is a revolutionary two part copolymer paint sealant system that is designed to be used by everyone who owns a vehicle. It is easily applied by hand; so anyone can do it.
No need for endless manuals, polishers, or equipment. HD® Nitro SealTM will make your car look newer than when you bought it.
This two part process is the first of its kind. HD® Nitro Seal activates its brilliance when you blend Part A and Part B(patent pending). on the surface of the automobile. Each bottle is topped off with nitrogen gas to ensure longevity of the shelf life and deliver spectacular results.
Part A is an aminofunctional fluid group and Part B is a hybrid Montan wax composite. Part A provides excellent surface affinity and spreadability through its incredible wetting feature (that’s why a little goes a long way), thus anchoring the product to the car paint.
Packaging:
Honestly, it could have come in a dirty sock for all I care. Nothing more exciting than receiving a detail order. However, the packaging is first class and makes you feel like you're about to open an expensive bottle of wine. The Aluminum (?) bottles also make you feel like this is a special product. The applicator pads I thought were super and while I preferred to use this MF Towel, the one supplied is probably more than satisfactory for the DIY'r. Instructions couldn't have been easier to follow.
Application & Removal -
I IPA'd after the Adapt polishing step.
Not exactly sure what part A is but when the instructions say to apply it THIN, one drop goes a very long way. Part A goes on unlike any sealant I've used before. It is not oily looking; it just slides on effortlessly and that one drop seems to last longer than it should. Once you've gone around the entire car with Part A you do the same with Part B - no wait time; which I'm guessing is Poxy on steroids.
What I experienced, and I hope it's meant to react this way and was not user error, was that Part B blended with Part A in such a way as to appear as if there was nothing on the paint. What I mean is that the "solutions" seemed to melt into the paint and disappear! Almost as if there was nothing to buff off.
Because the customer was in a hurry to pick the car up I could only allow an hour's cure time. But when it came time to buff, it was more like polishing an apple that removing prduct haze. Maybe there might have been what could be described as one or two high spots, but buffing the product off was effortless.
The Rest of the Story -
I did my best to persuade the owner to return in a month or so to evaluate longevity so at this point I can't comment on that.
But Nitro-Seal gave this paint a truly wet and deep gloss.
Cons -
It's somewhat difficult to measure out one drop at a time from the cannisters making it difficult to apply the thinnest coat you can.
Apparently because it was necessary to seal the product with nitrogen to keep it fresh, shelf life is minmal. Best have two cars back to back to use all the product in a day or so.
Final Thoughts -
If it lasts half as long as HD claims it can ( one year under best case scenarios) - for approx. $30 a car - it sure does give some low end Coatings a run for their money.
And oh yes, thanks to David and HD for the Giveaway.
This particular car was purchased from a Colorado dealership site unseen, picked up at nite and driven down to Santa Fe by the owners son.
Not only did it arrive with buffer trails, swirls and scratches in the most unusual places, but there was even compound splatter on the INSIDE of the rear windsheild!
Unfortunately, as is typical, since the dealer was only willing to pay a miserly amount for correction, and the owner wasn't willing to cough up the difference for a full correction, I did a one step using HD Adapt (mostly 'cause I just can't find a place for it in my arsenal and needed to use it up - Sorry HD) and my CHUPES - which I'm really not pleased with after all - and a Buff & Shine Blue Polishing Pad.
So on to the Review -
From the HD site:
Take your car's paint to another level!
Unprecedented slickness & shine
Revolutionary, Patent Pending, two part polymer paint sealant system
Super easy to apply!
HD® Nitro Seal is a revolutionary two part copolymer paint sealant system that is designed to be used by everyone who owns a vehicle. It is easily applied by hand; so anyone can do it.
No need for endless manuals, polishers, or equipment. HD® Nitro SealTM will make your car look newer than when you bought it.
This two part process is the first of its kind. HD® Nitro Seal activates its brilliance when you blend Part A and Part B(patent pending). on the surface of the automobile. Each bottle is topped off with nitrogen gas to ensure longevity of the shelf life and deliver spectacular results.
Part A is an aminofunctional fluid group and Part B is a hybrid Montan wax composite. Part A provides excellent surface affinity and spreadability through its incredible wetting feature (that’s why a little goes a long way), thus anchoring the product to the car paint.
Packaging:
Honestly, it could have come in a dirty sock for all I care. Nothing more exciting than receiving a detail order. However, the packaging is first class and makes you feel like you're about to open an expensive bottle of wine. The Aluminum (?) bottles also make you feel like this is a special product. The applicator pads I thought were super and while I preferred to use this MF Towel, the one supplied is probably more than satisfactory for the DIY'r. Instructions couldn't have been easier to follow.
Application & Removal -
I IPA'd after the Adapt polishing step.
Not exactly sure what part A is but when the instructions say to apply it THIN, one drop goes a very long way. Part A goes on unlike any sealant I've used before. It is not oily looking; it just slides on effortlessly and that one drop seems to last longer than it should. Once you've gone around the entire car with Part A you do the same with Part B - no wait time; which I'm guessing is Poxy on steroids.
What I experienced, and I hope it's meant to react this way and was not user error, was that Part B blended with Part A in such a way as to appear as if there was nothing on the paint. What I mean is that the "solutions" seemed to melt into the paint and disappear! Almost as if there was nothing to buff off.
Because the customer was in a hurry to pick the car up I could only allow an hour's cure time. But when it came time to buff, it was more like polishing an apple that removing prduct haze. Maybe there might have been what could be described as one or two high spots, but buffing the product off was effortless.



The Rest of the Story -
I did my best to persuade the owner to return in a month or so to evaluate longevity so at this point I can't comment on that.
But Nitro-Seal gave this paint a truly wet and deep gloss.
Cons -
It's somewhat difficult to measure out one drop at a time from the cannisters making it difficult to apply the thinnest coat you can.
Apparently because it was necessary to seal the product with nitrogen to keep it fresh, shelf life is minmal. Best have two cars back to back to use all the product in a day or so.
Final Thoughts -
If it lasts half as long as HD claims it can ( one year under best case scenarios) - for approx. $30 a car - it sure does give some low end Coatings a run for their money.
And oh yes, thanks to David and HD for the Giveaway.