Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Removing swirls where PC can't reach?
- Thread starter Warez
- Start date
Accumulator
Well-known member
Yep, you got it. I usually use MF or foam swabs (if that's all that'll reach).
Note that this can make for a lot of long, hard work in some cases (inaccessible spots on the Audis drive me nuts).
Most any product that works via PC will work fine by hand (and vice-versa) just make sure you work it long enough for it to break down if it's that kind of product.
Note that this can make for a lot of long, hard work in some cases (inaccessible spots on the Audis drive me nuts).
Most any product that works via PC will work fine by hand (and vice-versa) just make sure you work it long enough for it to break down if it's that kind of product.
Weird.
I got done with the PC, now I'm taking care of several areas by hand. Something's not right. It's looking kinda cloudy or foggy or something. I'm working small areas at a time. I'm using a MF towel to apply the product and I work it in until it looks like it's about to dry, then I remove and buff with another MF towel. Looks kinda hazy afterwards.
(Btw, I'm using 3M Perfect It FPP Glaze SMR (39009) )
Any ideas?
I got done with the PC, now I'm taking care of several areas by hand. Something's not right. It's looking kinda cloudy or foggy or something. I'm working small areas at a time. I'm using a MF towel to apply the product and I work it in until it looks like it's about to dry, then I remove and buff with another MF towel. Looks kinda hazy afterwards.
(Btw, I'm using 3M Perfect It FPP Glaze SMR (39009) )
Any ideas?
94BlkStang
New member
Warez said:For all those grooves or crevices where the PC can't reach, do you just use the same swirl remover product by hand? Foam applicator or MF or what?
Thanks...
I use Meguiars Hand Polish in areas that the PC can't reach. If it's pretty rough I'll use some DACP by hand first and follow with the Hand Polish.
Accumulator
Well-known member
Warez said:Weird.
I got done with the PC, now I'm taking care of several areas by hand. Something's not right. It's looking kinda cloudy or foggy or something. I'm working small areas at a time. I'm using a MF towel to apply the product and I work it in until it looks like it's about to dry, then I remove and buff with another MF towel. Looks kinda hazy afterwards.
(Btw, I'm using 3M Perfect It FPP Glaze SMR (39009) )
Any ideas?
Sorry, that's not a product I'm familiar with. It sounds like you're doing everything right so I dunno what's wrong. That's the same product you were using by PC, right? What do you think might be different about using it by hand (longer working time, more/less pressure)?
Wish I could be more helpful, must be frustrating.
FWIW, I have zero problems using the 1Z (any of their polishes) and/or 3M PI-III stuff (their 05937 MG and 05933 RC) that I like by hand :nixweiss