Questions on Products For My Job

B

Billy1882

New member
I just purchased a bunch of stuff from Poorboys for the first time. I have not used any other these products but have heard a lot of good things about them. The vechile I will be working on is black car that has a good bit of oxidation and swrils on it. I have a dewalt rotary and a pc that I will be using. This is a list of the products and the order of use:

Clay Magic
SSR2.5 w/ rotary
SSR1 w/ rotary
PwC or PP w/ pc
EX or EX-P w/ pc
Natty's

The questions I have are:
1. Should I use PwC or PP?
2. Should I use EX or EX-P?
Or if you have and suggestion about the process or anything else let me know.
 
Pb makes alot of great products and you have all my favs. The EX has carnuba and gives dark colors a nice "pop" whereas the EX-P doesn't have carnuba and gives light colors depth and a wet look . So for black I'd go EX. I don't think it'll make a diff w/the pwc or pp before the sealant so you could use PP instead and save your PwC for other quick one -step jobs.

:) :) LOL either one is fine. Aloha .
 
for best results , let the EX cure or sit for a day before applying the natty's . Then apply the natty's real thin , a little goes along way ..take some before and after pics if you can..
 
Hawaiianelement,

Thanks for the help. I will take some pics of the before and finish and post them.

One other thing, I haven't used a pc much but was thinking about trying it with the ssr2.5 and the ssr1 instead of using the rotary. What kind of speeds do you think are best? Also, what kind of speeds do you tink are best with the pc for the pp or PwC and the ex or ex-p? Thanks again.
 
You must log in or register to reply here.
Back
Top