Question regarding Z5 pro/ZFX and Z2 pro.

[mikeinaustin]

From the Zaino website:



"And for the most extreme enthusiast...

While not required, for the ULTIMATE in paint protection and an INCREDIBLE show car finish, use Z-AIO, followed by 2 coats of ZFX enabled Z-5 PRO, then 1 coat of Z-2 PRO (including a Z-6 wipe down between coats) and finish off with an application of Z-CS. Wait 12 hours, then wipe down the vehicle with Z-8. Get your sunglasses out, the gloss may be blinding. "



Does this mean that directly after 2 coats of ZFX/Z5 pro you can immediately put on a coat of Z2 pro without ZFX (ie without waiting 12 hours) ?



Also (same question really) can Z-CS be put on directly after Z2 pro has been put on without waiting 12 hours?



thanks in advance for your replies...

 

[imported_Nimble]

I would be hesitant to put on 3 coats of any sealent within hours of each other. Even with the famed ZFX.

 

[wannafbody]

3 coats max per day with ZFX for Zaino. I've had best luck waiting a day for the coat of Z8 (even over 2 coats).

 

[imported_rydawg1]

I have put on 3 coats of z5 in a row on numerous vehicles and the results were better than anything I have ever seen. I have also done z5 pro (zfx) x2, z2 pro x1 (no zfx) with CS on just on hood and front fenders and it bonded very well, The gloss was thick and very clear with the z5 depth under it all. I use to be a non zaino believer until I used z5pro. Now it is my #1 sealant and the new cs will highlight the glow even more.

 

[gmblack3]

I too have done 3x of either Z2/5pro w/ ZFX within a few hours without issue. I have then followed with Z8 right after. With any zaino product a little goes a long way.