Posting registration

M

maxshine

New member
I used Klasse (AIO, SG) for the first time this past weekend. This went on an 02 Maxima with Dark Blue Metalic. The previous coat was Meg Gold Class about 3-4 weeks old. I washed the car with Gold Class Shampoo (I thought about using Dawn but figured the AIO would remove the old wax). I applied the AIO with a Micro-pad as per instructions - nickel size drop, etc. The AIO went on easy and I applied a little pressure to aid in the cleaning. I tried to leave as little residue as possible. I changed from using the nickel size drop to a lesser amount more often as I seemed to 'run out' of product before I thought I should - I used FI to keep the pad damp. The product went off easy (using a MT but I did not feel that it left much shine or depth - but I do feel it cleaned well.



Next went on the SG - a fresh Micro-pad using FI. This went on easy as well and I left just enought residue that it could be seen. I finished the car and let it sit for 1 hour. I took off the SG residue with a fresh MT. I thought it was coming off fine and I could see some shine until I caught the surface in the light just right - that's when I began to see the haze that would just not come off. Sometimes it seemded to move around as I buffed it. Anyway, I had read about this so I just kept wipping and finshed the car. I then used FI on the the spots that did not buff out (most of the car). The FI worked just fine and car looked good. It did not have the shine or slickness that it had in the past using Gold Class but again I expected that. I plan to apply another coat this weekend and another the following.



My Concerns:



1) Did the previous coat of Gold Class somehow affect Klasse ?

2) Was an hour not long enough ? (65 degrees low humidity)

3) Did using the FI to aid in removal diminish the SG protection ?





Thanks for reading. Any comments are welcome.
 
This mysterious "haze." In your case, I believe the oils in the gold class inhibited bonding and crosslinking of the KLASSE. Oils and polymers don't mix!!!



You should of dawn washed. AIO is a cleaner, but people use such thin coats I don't know how they expect to get any type of cleaning out of it............



My idea of a product that cleans is something like NU FINISH, in which you glob it on, and rub like crazy...........
 
Hey Max we were up to the same thing this weekend. :) I used both of the Klasses on my white truck. I also had the same problem with wiping off the SG. Like you said I thought I had got most of it but when the light would hit a certain way I could see that I missed a lot. Using some QQ helped. What really worked though was the really early the following morning I went outside to my truck and found it coated with a uniform misty dew. I used a terry towel and with the help of the moisture from the dew I was able to wipe the rest off.



btw this morning I could still see the swirls from the PC but only with the aid of the dew that had settled on the paint.



If the treatment will last for six months I think it will be worth it. If it doesn't I think that I'll try Zaino. Long lasting protection is my number one goal for my truck because it stays outside and it is a big job to wax or seal it.



Here's a pic after the SG although the lighting isn't too good.
 
you are noticing the "gumming" effect from not letting the first coat cure before applying the second. Polymers are temperature sensititive, the warmer it is, the faster they cure. It seems recently (as it has been getting colder) that people have been having the hazing problem with KLASSE.



So how long did you wait in between coats? Remember KLASSE is a hi solvent product, so enough curing time should be allowed between coats.



It's a shame after all this time, and questioning, no one from KLASSE, stepped in and answered these questions on cure time.
 
Lately, after SG-ing the car, I find it looks better after the next wash. If I miss removing any small amounts of SG I try not to worry about it too much.



I've also been applying a fresh coat of SG after every wash...I'm up to 3-4 coats right now, with a week between each one.



The car looks amazing and I even had someone stop me yesterday and ask me what the heck I was using to get that shine! The depth is unbelievable and I love it just the way it is...forget the Blitz!



Paul
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Dave C. [/i]
<strong class='bbc'>Truck looks great Short Cut!! It's a '99 right?? [/b]</blockquote>
Good eye Dave! Thanks a bunch! I've had it for 3 years and 50k miles. It won't fit in the garage so it stays outside. I was pleased with the Klasse treatment and took a Couple More Photos afterwards.
 
I wonder if there are definitive answers for cure times on products like Klasse. It would be nice to know but I think there are too many variables. Perhaps someone can reach out to the Klasse folks for some insight.



Pauls' response about washing is the clue that Klasse isn't completely curing. The "OG detailerz" use the trick of spray water or rinsing the car after polishing. The reaction to water "cures" the product.



I've has this problem of hazing for years using 3M pink and #7. Now that I'm using Finish First I don't seem to have the same problems. But I'm not sure if that's related to the product, the paint, or the weather conditions.
 
I personally don't recommend using QD as AIO lube or for AIO/SG removal. I use distilled (or plain) water. As I said you can even breathe on Klasse and wipe it off.



If you use a damp (well wrung) MF applicator sponge for your AIO it'll help you get more out of the AIO. With the SG try to use the same part of the sponge, so by the second panel it'll be easier to apply all around.
 
Sweet pics Short Cut!! The grille guard, headache rack, and running boards really compliment the truck!! Is it a 3/4 or 1 ton? 5.4, 6.8, or 7.3L?? (Don't know the ci's on the new motors although I think the PSD is a 444ci)
 
I've used Klasse when the temperature was warm with low humidity and at lower temperatures. There is a big difference in the drying time of Klasse after application depending on the temperature like DetailKing has mentioned. Klasse is so much easier to remove when the temperature is higher with low humidity. I waited only 20 minutes to take the Klasse off and it was very easy with the aid of a dampened MF towel. I didn't miss any spots. I did check the car the next day in the sun and didn't notice and missed spots. On the other hand, at lower temperatures, it took longer for Klasse to dry. I waited 20 minutes and it was not completely dried. Had to wait 1 hour before it completely dried. Removal of SG was also harder and gummed up a little. Next year in the spring when it is time to detail again, I will definitely have to choose the best conditions to detail when using Klasse. The temperatures will be warmer and will aid in removal of SG. So to fellow Klasse users, postpone your detailing efforts for now and wait till spring time. If you must put another layer or just starting off with Klasse, then you will be spending a little more time on removal of Klasse.
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Dave C. [/i]
<strong class='bbc'>Sweet pics Short Cut!! The grille guard, headache rack, and running boards really compliment the truck!! Is it a 3/4 or 1 ton? 5.4, 6.8, or 7.3L?? (Don't know the ci's on the new motors although I think the PSD is a 444ci) [/b]</blockquote>
Hope Max doesn't mind our little side conversation. ;) It's a one ton V10 which is a 419ci if memory serves. I'm glad that I didn't get the diesel. The 10 tows a 30' fifth wheel up and down California's mountains just fine. When it's not towing the extra hp is nice for passing in the mountains.

Previously we always had a truck and a family car but this vehicle can serve as both. It will seat 6 men comfortably.
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Short Cut [/i]
<strong class='bbc'>

Hope Max doesn't mind our little side conversation. ;) It's a one ton V10 which is a 419ci if memory serves. I'm glad that I didn't get the diesel. The 10 tows a 30' fifth wheel up and down California's mountains just fine. When it's not towing the extra hp is nice for passing in the mountains.

Previously we always had a truck and a family car but this vehicle can serve as both. It will seat 6 men comfortably. [/b]</blockquote>Cool!! I don't see many Crew Cabs around these parts especially SRW Crews!! Also, the only 10cyl SD Pickup I've seen is my school's 00' Deep Wedgewood Blue F-350XL 4x4 Crew that's already pretty beat! :eek: Most SD's here are V8's (gas and a surprising amount of PSD's).
 
I had the same issue when it is cold, Now I let the SG dry for at least an hour, then remove with a MF, damp on one side and dry on the other.

Remove excess with the damp part, turn over and dry.... no haze, just shine! :bounce
 
It's best to have two MF towels on hand for the removal of SG. A dampened MF towel to get most of the SG off and the dry one to remove the little water droplets left by the dampened MF towel.
 
The thing that would definitely be great concerning this site is if perhaps you could actually sign up for discussions that you generate; Is this conceivable?
 
ayecyyuKmy3 said:
The thing that would definitely be great concerning this site is if perhaps you could actually sign up for discussions that you generate; Is this conceivable?
Click to expand...

When you subscribe to threads they then show up with a big check box in the Subject line making them easy to spot. Click on New Posts when you enter the Forum and all Threads with new posts since you last logged on or marked all threads as read will be listed with those you generated or posted in marked with the big checkmark. Visiting any specific Forum will also show the checkmark in any thread you post, read or unread.

To enable automatic subscription to threads you post in go to User CP, select Edit Options and under Default Thread Subscription Mode select whether you want e-mail notifications of posts to subscribed threads or not. Any selection other than Do Not Subsxribe turns on the feature.

AFAIK, you can't limit automatically subscribing to only those threads you started, all threads you posted in show up. Occasionally you may want to look at your subscription list and delete dead threads or those you're no longer interested in monitoring.

If you only want to subscribe to those threads you initiate you can't do it automatically. To do it manually go to the Thread Tools drop down after your post is submitted and select Subscribe.

If this isn't what you were asking... nevermind! :huh:

TL
 
Thanks for interacting with him, but he's was a spammer that I deleted earlier this morning.
Looks like he came in while I was sleeping. Sleep
Yes, contrary to belief....I do sleep....occassionally!
 
admin said:
Thanks for interacting with him, but he's was a spammer that I deleted earlier this morning.
Click to expand...

So that's why his Username was so hard to pronounce! :huh:

As we discussed via PM last week (assuming there's only 1 "Admin"), these were things I use on other vBulletin-powered Forums that I wasn't aware of on TID until I sniffed around a little more closely. Perhaps someone else can benefit.

OK, so just who is "Admin"? Is it a secret? Parents gave you a funny name so you don't use it? Is your computer hidden behind a curtain where Dorothy and Toto can't see you? As usual, I have more questions than answers...... :confused:

TL
 
You must log in or register to reply here.
Back
Top