Post your Best Half & Half Shots!

bufferbarry said:
This one i pulled off a 92 camaro it was off the hood at the stripes on clear coat.



DSCF1585.jpg
Click to expand...



Dear God....



Brillo is NOT an effective drying implement...
 
MikeEast said:
I didn't get any real live 50/50's on this 2000 Celica GTS, but I do have a couple of before and afters..



The drivers side was even worse - I think drunken monkeys were involved somewhere...







All Meguiars Products in use right now, I hadn't gotten the M105 and M205 at that time, so this is M83/M80 and 95 with various Lake Country pads on the PC.



Mike
Click to expand...



Whoa! Someone else in Cumming! :wavey
 
OTG Vinyl said:
Whoa! Someone else in Cumming! :wavey
Click to expand...



Yup! Mulberry Farms off Heardsville Road in Ducktown...



Howdy! :wavey



Awesome pics in this thread, totally impressive work - y'all are some impressive detailers!



Mike
 
MikeEast said:
Yup! Mulberry Farms off Heardsville Road in Ducktown...



Howdy! :wavey



Awesome pics in this thread, totally impressive work - y'all are some impressive detailers!



Mike
Click to expand...



No kidding! My father's old boss lives in there. I forget the name of the street, but if you take a right at the dead end right upon entering the neighborhood, it's the next street past the stop sign IIRC.



We're over on Hyde Road. Not far from you at all!
 
well this was before I brought the woolite/water to my arsenal so I used 2 bottles of Z9 and lots of brushes and tooth brushes to clean all of it. It took me forever! If I would have used woolite/water I think it would have been MUCH easier to clean
 
MobileJay said:
well this was before I brought the woolite/water to my arsenal so I used 2 bottles of Z9 and lots of brushes and tooth brushes to clean all of it. It took me forever! If I would have used woolite/water I think it would have been MUCH easier to clean
Click to expand...



Thank you sir. :up



I currently use Woolite for leather, I never thought it would have been able to clean that mess.
 
Well, I'm sure you could clean it with Woolite but you would still need a lot of it and the aid of brushes to help out and get in there. It still wouldn't be easy but it is probably easier than z9.
 
2000 grit wet sand followed by G110 with UC on 5.5" orange pad.





Scratches and hard water before:

S3600073-2.jpg




After:

S3600100.jpg




50/50 before wetsand

S3600088.jpg




After:

S3600102.jpg
 
You must log in or register to reply here.
Back
Top