Post up your ONR mixtures>>>>>

[Fallz]

I use 32oz spray bottles and would like to make different mixture for different purposes.

Post up what your mixtures and what you use them for / OR / if you ad anything to ONR (like OCW ect...)



Thank you, this would help me out a lot.

 

[spartacus_33]

I add 25% ONR to my car wash soap container. I hope the extra lube will help prevent scratches.

 

[togwt]

Various Uses for diluted ONR



Dilutions as per label



1. Car wash solution - 1oz / 2 gallons - (2 capfuls)

2. Detailer’s clay lubrication - 2oz / gallon (1:64)-( 4 capfuls)

3. Quick detailer (QD) – 6 oz / gallon (1:22) -( 4 capfuls)

4. Wet-sanding lubrication – 6 oz / gallon (1:22) -( 12 capfuls)



Note:

1. The use of ONR in a distilled water solution is an efficient method of cleaning as the polymers that are used to encapsulate soiling are not binding to any minerals found in ‘hard’ water, thereby increasing its effectiveness.

2. A solution with the dilutions (ratios) suggested utilizing a 16oz spray bottle (128 oz = 1 Gallon) makes its application easier

3. Each cap will hold 15 ml (0.5 oz)

 

[brownbob06]

Solution 3 should be 12 capfuls as well.

 

[wannafbody]

Almost every time that I use ONR I add a couple squirts of Zaino Z6.

 

[Scottwax]

ONR Wash and Wax @ 32:1 for glass and QD, all other uses its 1 oz per two gallons of water.

 

[RobD]

ONR Wash and Wax @ 32:1 for glass and QD, all other uses its 1 oz per two gallons of water.

Have you used ONR-WW QD strength as an interior QD? Is the added wax ok for all interior surfaces? TIA

 

[Scottwax]

Have you used ONR-WW QD strength as an interior QD? Is the added wax ok for all interior surfaces? TIA

Use it was wash strength for things like interior wipe-downs and steering wheel cleaning. Going on 6 months now with ONR WW on my own car, no issues at all. Usually on customer's cars its regular (v3) ONR since I'm detailing them but on my few wash customers, same thing, ONR WW on the interior, working just fine.

 

[Dan]

Instead of pouring out my leftover ONR water, I pour it into my pre-soak sprayer for the next car.

 

[RobD]

Instead of pouring out my leftover ONR water, I pour it into my pre-soak sprayer for the next car.

+1



If I don't use it for the wheels, I do that too.

 

[screeby]

Instead of pouring out my leftover ONR water, I pour it into my pre-soak sprayer for the next car.

First time ONR user here, what is the mixture for the pre-soak spray? Same as the wash? Really hope I am not missing it somewhere because I'll feel pretty dumb.

 

[Dan]

Some use a stronger mixture for pre-soak, like the QD ratio, but I use the wash ratio.

 

[peacemaker]

I usually use the leftover on my wheels... but dumping some in QD bottle is smart! Not sure if it will work for me since I dump my brushes in the leftover water while cleaning my wheels...

 

[Dan]

Even if the ONR is nasty, just let it settle overnight and pour off the top into the sprayer.

 

[RobD]

Even if the ONR is nasty, just let it settle overnight and pour off the top into the sprayer.

I've poured it through a funnel with a coffee filter which caught a lot of the grit/debris.

 

[Dan]

^^^ Good idea!

 

[RobD]

^^^ Good idea!

I've used a folded paper towel, too.