Post Deployment Change Up

SgtMajUSMC said:
Have you tried it yet? If it attracts stuff like Fuzion, I will pass. Generous offer thanks.
Click to expand...
Frankly, I don`t expect anything Earth-shattering from it...but being a Kamikaze junkie, just had to finally try it.

That said, the 22ple, if it has the durability of Kami, just might supplant it as my favorite. Have a co-workers vehicle I`m prepping for three coats of HPC next week.

Hopefully a repeat performance of my initial experience...non-metallic black so nowhere to hide.
1a3a5f175d29f51220129bb011457ce4.jpg
d244cf92167a8b32d78bbdb3d7c422c2.jpg
 
Should be. Used about 35ml to do 2 coats on a 2016 Ford Extended Transit Van (except for roof) like below; picked up a 50ml bottle to do 2 coats on our C5 Vette and was confident it would suffice ( although not doing Vette this year )
d4cbe9906ed08ec7d401e3ac37bbdfa4.jpg
 
SgtMajUSMC said:
Ya think 50ML is enough for two coats on the Vette?

ed19abf98879eb7672d04fee210f8ffe.jpg
Click to expand...
Had about 25ml in bottle, still have about half of that after first coat. Ease of application and extreme gloss once again amazes me. It really takes all the PIA aspects outta coating application; it`s at a point where anyone who asks me to do their car is gonna have to pony up the $$ for this cuz it`s just not worth the trouble to mess with anything else.

Wouldn`t be surprised if you got 3 coats outta 50ml. Used Gyeon foam block and Carpro suede for application...about 72 degrees F and slightly humid.
795af26542c7a4c715119bd239340549.jpg
 
Thanks. Good info.

Not enough time in the near future to set aside three days to get it done. Besides, it is in better shape than I thought it would be. Actually, after Iron X, fine clay sponge and a couple Reset washes it is like a pause button was pushed for 8 months. Couple of swirls added while I was gone but probably not noticeable to 99% of anyone else.

I really like the Ech2o/Reload mix and the VS1. I have a gallon mix of Uber and DGSS that will probably just sit unused now.

I might just wait until after summer to do the HPC.
 
SgtMajUSMC said:
Thanks. Good info.

Not enough time in the near future to set aside three days to get it done. Besides, it is in better shape than I thought it would be. Actually, after Iron X, fine clay sponge and a couple Reset washes it is like a pause button was pushed for 8 months. Couple of swirls added while I was gone but probably not noticeable to 99% of anyone else.

I really like the Ech2o/Reload mix and the VS1. I have a gallon mix of Uber and DGSS that will probably just sit unused now.

I might just wait until after summer to do the HPC.
Click to expand...

I originally got the HPC I`m using on the Honda for our 2004 Corvette (WG Uber last year) but after pulling it (Vette) outta storage, it looks good enough and is still performing well so no need to re-do this season.

I have many products that are sitting unused...they all seemed like a good idea at the time!
 
Gee, that`s one REAL study in contrasts! Different as can be, both utterly cool.

Is there some weird depth-of-field thing going on in that pic, or is the Mustang really that big/the `vette that small?
 
It`s just the picture angle. The Mustang is my buddies that he has been very slowing working on for years. We pushed it out of the garage for the picture.
 
You must log in or register to reply here.
Back
Top