Poor Boys APC takes the black off trim

B

BradUF

New member
When I used Poor Boys APC on the window trim it turned the cloth black and this scares me. It looks like its taking the dye or something off of the trim. I drive a Camaro SS 00. Is it safe to keep using it on trim?
 
Sounds like it is too harsh to be using. Are you using it full strength? If so you might want to try cutting it significantly, maybe 3 to 1 or 4 to 1.
 
dont use APC at full strength. Normally dillute it because it is very concentrated so you can make different concentrations for cleaning.
 
You may be using it too strong, however, if you have not cleaned your rubber in that area before, it probably has a rather large amount of dirt buildup.



I would certainly dilute the product to at least 4:1 for future use though.
 
Its the first time I cleaned the trim there. Wait is trim dyed? Isnt it just black plastic. So it cant come off right?
 
mblgjr said:
You may be using it too strong, however, if you have not cleaned your rubber in that area before, it probably has a rather large amount of dirt buildup.



I would certainly dilute the product to at least 4:1 for future use though.
Click to expand...



I agree, dirt loves to build up on that black rubber. Just for fun, try windex or something on your black trim, and you'll probably see almost as much black on the cloth.



And just for the future you should dilute. Safer and cheaper.
 
You must log in or register to reply here.
Back
Top