Please help me put these in products in order.

A

Albertan

New member
After receiving help in another thread from last week and reading through as many threads as possible, I've managed to go out and buy or order online everything I think I should need for some time to come. What I have or have ordered includes:



PC 7424



Sonus DAS Pads (2 each of Orange, Green, and Blue) and FlexPlate

Lakewood Pads (2 each of Orange & White, 1 Grey, 1 Black) and backing Plate



Zaino Z7, Z6



Wolfgang Poly Clay Bar



Klasse AIO



Poorboys SSR1, SSR2, SSR2.5, SSR3



Klasse High Gloss Sealant Glaze



Zaino Z2 Pro & ZFX



Pinnacle Souveran & Signature Series



First off, if I am missing anything please let me know. Second I think I have these in the correct order based on a suggested regimen from TOGWT. I understand that which polisher and pad to use depends on the case and to use the least aggressive combo possible to get the result. But if anyone could recommend which pads generally go with which products and an approximate speed on the PC for each step that would be great. As always, thank you for the assistance.
 
I'm not familiar with the Zaino process, but the SSRs would be applied with the most aggressive one (SSR3) first. Also, Klasse AIO should be applied after the SSRs, not before.
 
Following Maxie's advice, clay and then evaluate what you need SSR-wise. Finish with SSR-1 with a polishing pad until you are satisfied. Follow with AIO and the number of Z2Pro-->Z6 applications you want.
 
Thanks guys. The initial regimen I received has AIO before the polishes. Reading the manufacturer's description, it makes more sense to use it at the point you have recommended. Thanks again!
 
In the methodology suggested I apply AIO to clean the surface prior to polishing and apply a ISO to clean/inspect the surface afterwards (Check surface condition- by using a fine mist, spray the surface with Isopropyl alcohol (ISP) (Leave it to dwell for 30-45 seconds before wiping the paint surface with clean, dry 100% cotton (DF Alpine) towel. For surface imperfection that if removed could compromise the clear coat apply a glaze (12). The use of an electronic Mil gauge (Checkline Model DEF-900) to check the clear coat is highly recommended



If this step were omitted then paint cleaner (AIO) after the polish would be fine.

JonM
 
Thanks for clarifying that Jon. I think I got it now. Any benefit to reapplying AIO again after the SSRs using your regimen?
 
You must log in or register to reply here.
Back
Top