Placing my first Zaino order and have ?s

Get Z-5, Z-6 & Z-8. Don't waste your money on CS or ZFX. One coat of Z-5 will work wonders. I have never found that adding additional coats of Zaino looked any better than the first. Use the Z-6 after washing to get rid of water spots then finish off with Z-8. That's all you need my friend. :xyxthumbs



Patrick
 
ZAIO (cleansing, polishing and bonding) or CS for bonding of Z2 or Z5 and enhanced protection as base coat. CS can also be used as top coat for added gloss and protection.



Z2 or Z5 (protection and appearance).



Z8 (added paint enhancement (gloss, wetness and depth) and maintenance of protection)



If you already have a prep regimen in place(i.e Menzerna):

Z2 or Z5

ZFX

Z8
 
Z2 - Is solvent based.

Z6 - Is water based.



I am not saying that mixing to make Z26, does not do something for you. It does sound a little far fetched though considering that oil and water do not mix. IMO it sounds like a waste of products to me. Educate me on this one, please. What ratio or mixing combinations are you using? :)
 
howareb said:
Z2 - Is solvent based.

Z6 - Is water based.



I am not saying that mixing to make Z26, does not do something for you. It does sound a little far fetched though considering that oil and water do not mix. IMO it sounds like a waste of products to me. Educate me on this one, please. What ratio or mixing combinations are you using? :)





No, no, you see Z26 isn't obtained by combining anything, especially not Z2 and Z6. It's a special formulation soon to be released. Splash and Walk Away. "SWA" so to speak.
 
Back
Top