madazskunk
New member
Since I was one of the lucky ones to get the new pinnacle swirl remover packages from autogeek for $10 I thought I should let yautopia know what I think of it.
Sorry but I have no before pics because the swirls on my 2002 Black Trailblazer weren't bad enough to show up very well in pics.
Just to let you know what I was starting with Mike Pennington from Meguiars saw my Trailblazer at a recent clinic and told me my car was in pretty good shape and that all I needed was some swirl free polish and a polishing pad, if that helps anyone. Normally in this situation I would use 1z metallic because 1z is my favorite line of polishes and I don't care for SFP.
So I went with the regular swirl remover and used a white polishing pad on speed 5. I like the fact that you can actually see this polish breaking down it goes from greenish white to almost clear after a few passes. When removing my paint was very (squecky) similar to what I get with the meguiars line. After doing half the hood I took it out in the sun to compare. the results were awesome maybe even a little bit better than MP. I would say 95% of the swirls were gone/filled. I then topped with the Liquid Soveran and must say that LS is by far the easiest liquid wax/sealant to remove I have ever used. It almost came off with no pressure on the MF. It looks just as good as every other top end wax/sealant and has very good slickness. Very satisfied.
I don't know well the swirl remover removes swirls because I didn't do the alcohol test but it filled/removed them to my satisfaction. One thing I do not like is this product is very very oily. It reminds me of the problems I had with paintwork cleansing lotion when I first joined autopia. You have to take your car in the sun to see if you removed all the product and at times it seemed like I was just pushing oil around. This may be operator error that can be eliminated after getting more familar with it though, well see.
Overall I am very satisfied and would consider buying both the swirl remover and liquid soveran again.
Sorry but I have no before pics because the swirls on my 2002 Black Trailblazer weren't bad enough to show up very well in pics.
Just to let you know what I was starting with Mike Pennington from Meguiars saw my Trailblazer at a recent clinic and told me my car was in pretty good shape and that all I needed was some swirl free polish and a polishing pad, if that helps anyone. Normally in this situation I would use 1z metallic because 1z is my favorite line of polishes and I don't care for SFP.
So I went with the regular swirl remover and used a white polishing pad on speed 5. I like the fact that you can actually see this polish breaking down it goes from greenish white to almost clear after a few passes. When removing my paint was very (squecky) similar to what I get with the meguiars line. After doing half the hood I took it out in the sun to compare. the results were awesome maybe even a little bit better than MP. I would say 95% of the swirls were gone/filled. I then topped with the Liquid Soveran and must say that LS is by far the easiest liquid wax/sealant to remove I have ever used. It almost came off with no pressure on the MF. It looks just as good as every other top end wax/sealant and has very good slickness. Very satisfied.
I don't know well the swirl remover removes swirls because I didn't do the alcohol test but it filled/removed them to my satisfaction. One thing I do not like is this product is very very oily. It reminds me of the problems I had with paintwork cleansing lotion when I first joined autopia. You have to take your car in the sun to see if you removed all the product and at times it seemed like I was just pushing oil around. This may be operator error that can be eliminated after getting more familar with it though, well see.
Overall I am very satisfied and would consider buying both the swirl remover and liquid soveran again.
