Peugeot 307 CC meets Menzerna and Aquartz

P

porta

New member
Paint corrected with Menzerna PO203S and refined with PO85RE5. Ipa wipedown and alkalie wash was used to get the paint clean before coating with Aquartz and one layer of Reload.



Tires dressed with Wolf Chemicals, great tire dressing! Windscrean was treated with PPS nano glass treatment.



001.jpg




003.jpg




012.jpg




022.jpg




002.jpg




052.jpg




274.jpg




267.jpg




307.jpg




269.jpg




280.jpg
 
2005GTPinMD said:
That looks great. I cannot wait for these coatings to be sold in the U.S. - how durable are they in the Swedish winter?
Click to expand...



Thanks. I hope it will survive the winter with all the degreasers who are used here. Will do a test on my own car with Optimum Opti coat and Aquartz during this winter.
 
2005GTPinMD said:
That looks great. I cannot wait for these coatings to be sold in the U.S. - how durable are they in the Swedish winter?
Click to expand...



Auto Aesthetica - Exclusive Detail Supply and Premium Car Care Products has coatings already for a while. A lot of forum member recommend them here and other forum - outstanding personal service compared to anyone else of past couple years. Alot of people just ordered coating, I made huge purchase for winter because owner was amazing helpful and gets my continue of business.





Porta, what did you use for wash before coating?
 
ltebow34 said:
Porta, what did you use for wash before coating?
Click to expand...



Blue and green - degreaser wet, wich is a petroleum based degreaser with alcohol so it can be used on wet surfaces.

This is for all the winter grime, salt, tar and etc. I left this to work under 10 minutes, rinsed of with a pressure washer.



Then I foamed the car twice with Lahega Autosafe 500, wich is a very effective(high ph) trafic film remover (TFR), wich I

left to dwell under a couple of minutes. Rinse with pressure washer.



Washed the car with a strong mixture of Allbrite cherry foam, with some of the TFR as used before, this to be sure to remove the

wax layer.



Then I dried the car and applied Aquartz Iron cut, rinsed off with pressure washer.



Clay, rinse, and then I dried the car.
 
ltebow34 said:
Auto Aesthetica - Exclusive Detail Supply and Premium Car Care Products has coatings already for a while. A lot of forum member recommend them here and other forum - outstanding personal service compared to anyone else of past couple years. Alot of people just ordered coating, I made huge purchase for winter because owner was amazing helpful and gets my continue of business.





Porta, what did you use for wash before coating?
Click to expand...





Awesome thank you so much. How hard is the coating to use for a weekend detailer?
 
Very easy actually. Apply thin, it come with thin cotton "slice" pads( i dont know word) and you just tip bottle on to it and apply then it dry for like 20-40 minute then remove anything left on surface with a good microfiber. I use first on trims and its VERY nice finish to it. I have not coat glass yet, but you can use on glass, paint, wheels.



Also some people who are buying this are having trouble because they polish paint but dont get surface clean of polish oil so it will mess up if not perfectly clean so make sure of that. I did not have this problem as I washed cars after polishing. Multiple IPA wipedown during polishing and then if need do a light wash to get off all oils.



AA has top CS - best I have run into yet. Already place a second big order with them.



Porta - do you have to agitate this? Or foam on, dwell rinse type of wash?
 
You must log in or register to reply here.
Back
Top