I have decided to use the perfect shine system outlined on this site. I just have a few questions. I have heard that Klasse all-in-one is hard to use. Is there an alternative that will give me the same durability? Also, I will be using the P21S paintwork cleanser, will this remove small scratches? Will it thin my clearcoat too much? And finally, I have decided to use Einszett polishes to remove scratches after wetsanding. Are those polishes good? Also, if I have waterspots that will not come out with the paintwork cleanser, will it be safe to use the Einszett polish on the whole area with the waterspots? Please help!
perfect shine system questions
- Thread starter dpreuss
- Start date
imported_Greg1
New member
I am not sure where to begin. Klasse AIO is very easy to use, you are thinking of SG. Try the BillNorth WOO method (search) and it is very easy. P21S paint cleaner won't remove small scratches, it won't thin the clearcoat at all. 1Z polishes are good choice. If you are wetsanding, why are you worried about your clearcoat being too thin, wetsanding takes off a good portion. The 1Z polishes are very good, you will need to start with Ultra then Paint polish. Yes, the 1Z polishes are safe to use on the whole area.
Why are you wetsanding you car is my question? So your process would look something like this: Wash, wetsand, 1Z UP yellow pad, 1Z PP, AIO, SG. The P21S cleaner probably isn't necessary.
Why are you wetsanding you car is my question? So your process would look something like this: Wash, wetsand, 1Z UP yellow pad, 1Z PP, AIO, SG. The P21S cleaner probably isn't necessary.
I am wetsanding with 3000 grit just certain spots were there are scratches through my clearcoat. I will also be wetsanding down the touchup blobs after i do my touchup. I was thinkin about only using the 1z polishes for touch up of scratches, chips, waterspots, ect, not every time i wax, so i can keep clearcoat thinning at a minimum. I thought i would use the P21S for the whole car before waxing, when i don not need to use an aggressive polish such as the 1z products. I also will probably be applying everything by hand, including the 1z polishes, because I only have a crappy craftsman orbital and I have had problems with it's bonnets putting swirl marks in the finish, I'm planning on a PC, but I have no money after buying wheels
. I hope i answered ur questions about my first post. I also have another question. Should apply some 1z paint polish over the whole car just for initial "system" application, to get rid of any small scratches/swirls/waterspots? I don't want to use the ultra polish because that might be too aggresive (for the whole car). Also, would i need to purchase some 1z metallic polish, or would the P21S take it's place? Please tell me what you think. Thanks.
. I hope i answered ur questions about my first post. I also have another question. Should apply some 1z paint polish over the whole car just for initial "system" application, to get rid of any small scratches/swirls/waterspots? I don't want to use the ultra polish because that might be too aggresive (for the whole car). Also, would i need to purchase some 1z metallic polish, or would the P21S take it's place? Please tell me what you think. Thanks.imported_Larry A
New member
Two systems to use 1Z paint polish followed with P21s cleanser and then P21 wax. Or 1Z paint polish followed by Klasse AIO and then Sg using Bill North method. If you chose you can follow SG with P21 wax in 24 hours.