peanut butter on trim?

I have heard & seen this but never tried it. Supposedly the peanut butter scrubs the spent surface and the oils bring the shine back. Sounds like basically polishing rubber without white residue compound would leave.
Problem is there is no longevity in shine. The rubber will still need to be cleaned after the peanut butter and treated.

I assume that would be smooth not chunky brand:).
 
Concours.John said:
I have heard & seen this but never tried it. Supposedly the peanut butter scrubs the spent surface and the oils bring the shine back. Sounds like basically polishing rubber without white residue compound would leave.
Problem is there is no longevity in shine. The rubber will still need to be cleaned after the peanut butter and treated.

I assume that would be smooth not chunky brand:).
Click to expand...

haha and i bet it would be messy :)
 
I tried using it to remove dried on wax residue. While it mostly removed the wax it left a brown residue that was as hard to remove as the wax residue was. It was a textured black surface, might do better on a smooth surface. Since it's the oils in the PB that are supposed to do the work maybe straight olive oil would work better. And it's better for you. :D
 
I have used it on trim to remove the white residue. It does a good job and the oil beads water nicely the next few times the trim gets wet. After I spread the PB I let it sit for a few minutes and then wipe clean with a clean towel. I have not yet seen a brown film.
 
I think that you are confusing peanut butter with peanut oil. PO can be used to remove old wax with a tooth brush from trim. It will also make the trim shine up but that's only a temporary
 
I would do anything to see a pro detailer pull a jar of Peter Pan out of his tool box with an applicator pad and go to town on a bumper pad in front of the client rofl.

Sent from my DROIDX using Tapatalk
 
thats what i used yesterday during my power outtage... kept me from getting that i'm starving feeling.... i also heard that peanut oil actually worked better for removing wax residue..
 
Now the question is does peanut butter (free from any contamination) have any polishing capabilities:)! What pad would you star with:)?
 
Concours.John said:
Now the question is does peanut butter (free from any contamination) have any polishing capabilities:)! What pad would you star with:)?
Click to expand...

Cut with crunchy and an orange or wool pad, finish with creamy and white or grey. Id go for Crisco as the lsp.

Sent from my DROIDX using Tapatalk
 
mrclean81 said:
I would do anything to see a pro detailer pull a jar of Peter Pan out of his tool box with an applicator pad and go to town on a bumper pad in front of the client rofl.

Sent from my DROIDX using Tapatalk
Click to expand...

On a BMW site in the detail section, a detailer was posting that he used peanut oil on the trim of a Range Rover he was detailing. Needless to say, he caught some serious flack over it.
 
Beemerboy said:
On a BMW site in the detail section, a detailer was posting that he used peanut oil on the trim of a Range Rover he was detailing. Needless to say, he caught some serious flack over it.
Click to expand...

Some old school "tricks" are better left in the 80s. Peanut oil, Ajax, WD40, cheese cloth, aluminum foil & soda, etc. I don't understand why some refuse to leave the stone age. That stuff never really worked well to begin with.

Sent from my DROIDX using Tapatalk
 
mrclean81 said:
Some old school "tricks" are better left in the 80s. Peanut oil, Ajax, WD40, cheese cloth, aluminum foil & soda, etc. I don't understand why some refuse to leave the stone age. That stuff never really worked well to begin with.

Sent from my DROIDX using Tapatalk
Click to expand...

Don't forget Pledge on the dash, my father used to do this in the 60's
 
My grand father would put baby oil on the dash and on the vinyl top of his Town Car when I was little
 
mustangmike said:
I tried using it to remove dried on wax residue. While it mostly removed the wax it left a brown residue that was as hard to remove as the wax residue was. It was a textured black surface, might do better on a smooth surface. Since it's the oils in the PB that are supposed to do the work maybe straight olive oil would work better. And it's better for you. :D
Click to expand...

Have a dog helper handy to lick it off and it will save time too, and make the dog very happy !:lmfao
 
You must log in or register to reply here.
Back
Top