PC help

S

SouthernZ71

New member
Well, I am now the proud parent of a lil baby PC 7424 from Coastal Tool!!:bounce :bounce :bounce :bounce :bounce



I was getting ready to change from the 5 to the 6 weight, but when I removed the 5 weight I noticed it had a groove (on the backside) that the 6 didn't. Now, I know "it's just a groove no biggie," but there is a lil black plastic nipple that (I assume) was used to line up the 5 weight on the PC and this nipple won't allow the 6 weight to lie flat? If I had a digital I would shoot some pics. I didn't try hard but it seems like it will just pull off?



Any ideas?



Thanks
 
i wondered this too, anyone know? I just put the 6 on and tightened it down so that it was almost flat.
 
I just did what you did. Was going to get the dremel tool out, but decieded I would hold off. I tightened the 6 down and its sitting flat and snug. Maybe its a vibration bushing to keep the 2 metals from making noise?



Hopefully someone will chime in that knows.
 
Technical Information: (888) 848-5175

From the Porter Cable site.



I would hate to see you loose your warranty due to unauthorized modifications!
 
You must log in or register to reply here.
Back
Top