PC and Klasse Help

T

tennisjon2002

New member
I have a new PC that I need to start using but I am not sure what pads to get. I plan on mostly using Klasse AIO and SG. What are good strength pads for klasse? I plan on getting lake country pads because I have heard good things about them, any suggestions? I am also looking for a light polish to take out some light swirls from a dirty drying towel what should I get?
 
tennisjon2002- Welcome to Autopia!



The light polish I usually recommend is discontinued and getting hard to find...so I guess I'l look at Menzerna or the BlackFire/Menzerna Finishing polishes.



Unless you have *very* soft paint I'd use a white LC pad with the AIO (I'd use a white LC pad with the polish too).



I like to apply KSG by hand so I can get it very thin (about the only time I don't use a machine for such stuff) but if you want to use the PC I'd go with the black/dark gray LC finishing pad.
 
Thanks for the advice. I will mostly use it for honda's so the paint is thin. I have heard of applying SG by hand instead of PC because of how thin of a layer u want, I will have to try it out and see what I like.
 
Second the Menzerna (Final Polish in particular) suggestion. Get a white pad for AIO using a PC. Use a foam applicator like the Meguiar's yellow foam to apply SG. Spritz it with a little Eagle One QD (or any QD without carnauba) to prime the pad. Spritzing also applies to AIO.



Try to get 3-5 layers of SG before you even consider topping it. You might find that you might want pure Klasse as toppers mute the shine and alter the paint color.
 
You must log in or register to reply here.
Back
Top