fergnation
New member
This past Fall I did full corrections on 2 seperate H2's. One was black and the other was orange. My question, why is the paint so grabby. I used M105 with a PFW and SIP on a white Sonus pad finished with Ultrafina with a 3m Ultrafina. All three of these combinations had the same problem. The paint would grab the pads so bad that I actually burned out one of my Makita rotaries
. Before the rotary burned it popped the fuse breaker three times because it was drawing so much power to spin the pads on the H2 paint. I did 2 seperate paint colors and it was the same way on both colors.
Can anyone explain to me why the paint on the H2's is this way. I have corrected atleast a hundred different makes and models and the H2 is the only paint like this. Does anyone know why:werd:
. Before the rotary burned it popped the fuse breaker three times because it was drawing so much power to spin the pads on the H2 paint. I did 2 seperate paint colors and it was the same way on both colors.Can anyone explain to me why the paint on the H2's is this way. I have corrected atleast a hundred different makes and models and the H2 is the only paint like this. Does anyone know why:werd: