paint correction

liljojo4711

New member
i use eagle one car wash, meguiars clay bar kit and meguiars NXT 2.0 wax. 2 bucket method with grit guard, mf wash mitt, mf towels and a waffle weave towel for drying. anything else i should add to my routine?



i also need some advice on what to use to get rid of 10 years of scratches, swirls, fading and anything else that is on there. here are a couple pics (best i could do):



35ddpug.jpg




ojgyhh.jpg




eprbq0.jpg




i can maybe get some better pics, but im not really sure how to capture it on the camera...
 
liljojo4711- Yikes, that's a good deal of marring.



I'd add a foamgun to your wash regimen and work on your technique so you're not rubbing dirt into/against the paint so much. I'd use many more mitts too.



I can go on forever about wash techniques...



To remove the marring you'll need to use an abrasive polish. Doing so via machine will be a lot easier/more effective than doing it by hand but Meguiar's Ultimate Compound, followed by either their Scracth-X v2.0 or Swirl-X would work by hand if you put in the time/effort.
 
Back
Top