PA High Gloss question

Yes it increases gloss on white but you need a good base of polished paint to start with. Where are you located. You can try some of mine if your local.

Thanks for the offer, but i couldn`t resist and ordered some last night. I recently used iron X, clayed ,polished with Sonax perfect finish then 2 coats of fk1000p.
I usually put overcoat as a topper. I am in Connecticut.
 
Every once and a while it`s fun to change the appearance of our coated cars (coating combo produces a warm, deep glow); dropping some high gloss on gives it a nice, sharper gloss highlight for a bit. Definitely adds gloss, that`s for sure.
 
Well, how did it do on top of FK?

As far as looks the HG on top of FK looks great, glossier than Overcoat. As far as durability that remains to be seen, I can say the beading is awesome.
Although FK had a great look itself, I felt the need to top it.
 
I`d also like to know how you like it. I`m thinking about grabbing some to check it out.
make sure you take a towel and quarter it and spray an x onto the towel then apply to the paint and use a second towel to buff what little is left

it melts into the paint and that bottle lasts a long time, I barely opened my second bottle about a month ago and been using it since it came out

takes me about 7 sprays to do my entire srt challenger
 
Is PA High Gloss worth it for white? Or is just for Darker colors?

Although I don`t usually buy marquis brands, I decided to do so with Polish Angel when I purchased an expensive MB about a year ago. When you pay as much as I did for a car (2017 CLS 550) you don`t mind spending a couple hundred bucks to detail it right. The color is a premium Mercedes paint option called "Diamond White". My previous Mercedes was also in "Diamond White" and I found a number of products that worked very well with this color, among them Duragloss, Sonax and Collinite.

I began by washing, clay and a non-abrasive chemical paint cleaner (P21s Paintwork Cleanser). I then put down two hand coats of PA Carnaubaflockencreme in Snow White, which as the name suggests, is formulated for white cars. This was followed by one coat of High Gloss which was applied wipe on/wipe off, as you would a qd or spray wax. The results were terrific to say the least and I could not be happier. However, having said that, I am not sure I can justify the cost from here on out because I have achieved similar, or close to it, results with other products. PA is easy to work with and a little goes a long way. I think next time I will do a side by side using PA vs Sonax Polymer Net Shield/Brilliant Shine booster or Duragloss 111/Aquawax booster just to see the difference up close and in real time. If money is not a consideration for you then go with this PA combination for white cars that I use - you will not go wrong.
 

Attachments

  • CLS Detail Polish Angel 002.JPG
    CLS Detail Polish Angel 002.JPG
    440.4 KB · Views: 24
  • CLS Detail Polish Angel 001.JPG
    CLS Detail Polish Angel 001.JPG
    469.2 KB · Views: 23
  • CLS Detail Polish Angel 005.JPG
    CLS Detail Polish Angel 005.JPG
    469 KB · Views: 22
  • CLS Detail Polish Angel 010.JPG
    CLS Detail Polish Angel 010.JPG
    461.3 KB · Views: 22
  • CLS Detail Polish Angel 007.JPG
    CLS Detail Polish Angel 007.JPG
    449.7 KB · Views: 19
  • CLS Detail Polish Angel 009.JPG
    CLS Detail Polish Angel 009.JPG
    456.3 KB · Views: 20
  • CLS Detail Polish Angel 008.JPG
    CLS Detail Polish Angel 008.JPG
    439.2 KB · Views: 23
  • CLS Detail Polish Angel 011.JPG
    CLS Detail Polish Angel 011.JPG
    451.8 KB · Views: 23
  • Celine 2 004 (1024x768).jpg
    Celine 2 004 (1024x768).jpg
    508.8 KB · Views: 24
  • Celine 2 002 (1024x768).jpg
    Celine 2 002 (1024x768).jpg
    459.8 KB · Views: 26
Brandt
If you use just 7 sprays to do your entire car, I`m in bad need of some help/instructions when I do my truck!!!!! I`ll supply the product, you can supply the knowledge. LOL
Jay
 
Back
Top