P21S or Klasse High Gloss Sealant glaze?

V

VelvetRose

New member
I bought the Klasse all-in-one and the P21S Carnuba wax. I applied the Klasse first then 2 coats of the P21S wax. I love the shine, but then I was reading about the Klasse High Gloss Sealant Glaze. If there's something that would make it even better, I'm all for it. Is it overkill? Or is the Glaze over the All-in-one better than Carnuba over it? Thanks,

Christine
 
Use 'em all.



AIO, then a few coats of SG, then top it with some P21S. Wait 24 hours in between coats, if you can. Otherwise you will just remove the previous coat before it has had time to cure.
 
yeah i use em all....at least klasse sg will last a long time



just remeber you cant alternate between p21 and sealant glaze....it needs to be aio , then sleanat glaze until your happy you've got enough on....then p21s. when your tired of p21s you need to start over with aio
 
Pb2theMax said:
Use 'em all.



AIO, then a few coats of SG, then top it with some P21S. Wait 24 hours in between coats, if you can. Otherwise you will just remove the previous coat before it has had time to cure.
Click to expand...



So put on the AIO and wait 24 hours? Then put the SG on and wait 24 hours? What happens if you want to put on several coats of SG....that could take a week. Would it hurt to only wait an hour or so between coats? Then put on the p21s on last. Thanks.
 
You can apply SG right away over AIO. However, you should wait some time between SG coats. 24 hours is perhaps best but I get good results in 12 hours. You don't need more than 2 or 3 coats of SG. Just be sure that you keep the car in the garage and don't drive it between coats. If you do drive it, you are better off washing it again before applying another SG coat. SG, Jett or any sealant for that matter, must be applied over as clean a surface as possible.
 
You must log in or register to reply here.
Back
Top