Angus
AspiringProductSpecialist
For this review, I'm going to share my experience using P21S’s Multi-Surface Finish Restorer to clean up my 335i’s exhaust tips:
From Autopia’s product page for P21S Multi-Surface Finish Restorer:
Above 2500rpms the exhaust flap opens allowing exhaust gasses to pass through a shorter pipe which maximizes the back pressure effect to provide the best performance. So if you’ve ever wondered why a 335i’s right tip is always just a little bit filthier then the left tip that’s why.
Prior to using MSFR I washed off both tips with regular car soap to remove as much reside as possible. I then squeezed a small amount of MSFR onto a cheap big-box store MF towel I use exclusively for cleaning exhausts tips.
When squeezed out, MSFR resembles toothpaste, has a pale yellow/tan color, and has a very light odor. It’s not a great smell but it’s also a bad one either. Germans don't do fruity fragrances in their products
Using about a dime sized amount I proceed to remove the black sooty residue turning the mf frequently and reapplying MSFR to a fresh clean surface as needed.
Polishing up each tip inside and out took about 15 – 20 minutes and the results are dramatic:
Next I sealed the tips with a layer of BLACKFIRE’s excellent Wet Diamond Metal Acrylic Sealant. Applying BF WDMAS will make future clean ups far easier with only a few passes with a soapy speed master wheel brush required.
Conclusion: I’ve been using MSFR for years on various metal surfaces from exhaust tips to aluminum trim with fantastic results. At $11.99 a for a 3.5oz tube that'll lasts a heck of a long time MSFR a must have product for your car care arsenal. Like most of the products in the P21S line, Multi-Surface Finish Restorer just works. :bigups
From Autopia’s product page for P21S Multi-Surface Finish Restorer:
“P21S Multi-Surface Finish Restorer is one polish for many surfaces! P21S Multi-Surface Finish Restorer restores the shine to metal surfaces and repairs many scratches on paintwork. Rub it on and watch the shine reappear on multiple auto surfaces. P21S Multi-Surface Finish Restorer works without the harsh ammonia odor of other polishes. It’s easy to rub out and get a brilliant finish. Use P21S Multi-Surface Finish Restorer on paint blemishes and on metals to keep your vehicle looking its absolute best.”
This BMW has an exhaust flap in the left muffler that stays closed from idle up to 2500rpms. The flap forces exhaust gasses to pass though a longer resonator pipe to reach the right muffler. This results in a reduction in low frequency noises but also delivers significantly more exhaust residue to the right muffler’s tip:
Above 2500rpms the exhaust flap opens allowing exhaust gasses to pass through a shorter pipe which maximizes the back pressure effect to provide the best performance. So if you’ve ever wondered why a 335i’s right tip is always just a little bit filthier then the left tip that’s why.
Prior to using MSFR I washed off both tips with regular car soap to remove as much reside as possible. I then squeezed a small amount of MSFR onto a cheap big-box store MF towel I use exclusively for cleaning exhausts tips.
When squeezed out, MSFR resembles toothpaste, has a pale yellow/tan color, and has a very light odor. It’s not a great smell but it’s also a bad one either. Germans don't do fruity fragrances in their products
Using about a dime sized amount I proceed to remove the black sooty residue turning the mf frequently and reapplying MSFR to a fresh clean surface as needed.
Polishing up each tip inside and out took about 15 – 20 minutes and the results are dramatic:
Next I sealed the tips with a layer of BLACKFIRE’s excellent Wet Diamond Metal Acrylic Sealant. Applying BF WDMAS will make future clean ups far easier with only a few passes with a soapy speed master wheel brush required.
Conclusion: I’ve been using MSFR for years on various metal surfaces from exhaust tips to aluminum trim with fantastic results. At $11.99 a for a 3.5oz tube that'll lasts a heck of a long time MSFR a must have product for your car care arsenal. Like most of the products in the P21S line, Multi-Surface Finish Restorer just works. :bigups
Last edited:
