Owners of a cyclo and pc

M

max080

I need a new job
I don't need much detail on this subject. I've read alot about the cyclo and am pretty convinced I will drop the coin and get this machine to go along side my pc. My main question is time. How many of you upgraded to a cyclo and found that it is a big time saver. I feel that my technique is improving and now would like to start thinking about saving time on details. So...is there a noticable time savings in using a cyclo over a pc?
 
I don't know that I would say it's faster than a PC. I think it's better as far as removing more defect, but I don't think you'll get a Cyclo and say "Wow, this works faster than a just using a PC."

If you are looking for really noticeable time savings, you might look into getting familiar with a rotary.
 
i agree with jared,

if you become very proficient with a rotary, you will save plenty of time on your detailing. when it comes to detailing the exterior polishing takes most amount of time.
 
I have a pc / and a rotary and let me tell you the pc does good work,but if you get good with a rotary you will save alot of time. If you get one take your time with it or you can cuase yourself alot of problems,GOOD LUCK !!!
 
I've found that the cyclo cuts down on the # of polishing steps/passes. It cuts up defects much quicker than a PC.

You have to change out pads more often with the cyclo, especially if you're working with compound.

Have you tried a cyclo before? People either like it a lot, or flat out hate it. I haven't seen much middle ground.
 
Another comment, and this is just for enthusiasts like myself I suppose. For someone who does not do much "professional detailing" (and by that I mean getting paid for doing the work, not the quality of the work), a cyclo may be exactly what you need to be more aggressive. I'll be honest, I am not well versed in the use of rotary polishers. The Cyclo is exactly what I need when I do venture off and do a vehicle that is a little beyond PC repair.

Now on my personal vehicles, I rarely use anything but mild polishes and pads with a PC anymore, due to the washing techniques I have picked up here. I have found that if you properly care for the paint in between details, that I really don't have too much to polish out when the time comes for another session.

I hope that makes sense... :)
 
JaredPointer said:
Another comment, and this is just for enthusiasts like myself I suppose. For someone who does not do much "professional detailing" (and by that I mean getting paid for doing the work, not the quality of the work), a cyclo may be exactly what you need to be more aggressive. I'll be honest, I am not well versed in the use of rotary polishers. The Cyclo is exactly what I need when I do venture off and do a vehicle that is a little beyond PC repair.

Now on my personal vehicles, I rarely use anything but mild polishes and pads with a PC anymore, due to the washing techniques I have picked up here. I have found that if you properly care for the paint in between details, that I really don't have too much to polish out when the time comes for another session.

I hope that makes sense... :)
Click to expand...

I agree 100%.
 
You must log in or register to reply here.
Back
Top